Hi, can someone tell me where I can fire the bug? I found only this link: https://bugzilla.yoctoproject.org
Cheers Ghani ----- Original Message ----- From: "David Scully" <[email protected]> To: [email protected] Sent: Friday, 2 September, 2016 19:22:29 Subject: Re: [MinnowBoard] MinnowBoard MAX 0.93 64-Bit & network lost I have also run into problems with connectivity with the latest firmware that is resolved by reverting back to 0.92. However, I'm using a custom board that uses Intel i211 NICs instead of the Realtek NIC. As I understand it, this is the same NIC as what will be in the Minnowboard Turbot Quad. For the i211 connected to PCIe Port 1 on my board, I typically can trigger this failure when I to do bidirectional TCP/IP iperf tests: Board: iperf -c 192.1.127 -t 300 -d Development PC: iperf -s The error message from the Intel NIC driver is: [Sep 2 10:00] igb 0000:03:00.0 enp3s0: PCIe link lost, device now detached I'm running stock 0.93 firmware with Ubuntu 16.04.1. If OP hasn't created a Bugzilla entry I could do it, but I was hesitant because this isn't original hardware. Let me know if there is anything I can do to help, David Scully -- View this message in context: http://minnowboard.57273.x6.nabble.com/MinnowBoard-MinnowBoard-MAX-0-93-64-Bit-network-lost-tp2387p2392.html Sent from the MinnowBoard mailing list archive at Nabble.com. _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard This email has been scanned by Barracuda Networks. _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
