I guess I've found something odd... when we do (1): $ echo -e "%_topdir $(echo $HOME)/rpmbuild\n%dist .el$(lsb_release -s -r|cut -d"." -f1).local" >> ~/.rpmmacros
it means that in file .rpmmacros, these two lines should be there (..in my case..): %_topdir /home/dafh/rpmbuild %dist .el7.local but the echo '-e' option 'doesn't work fine' (and I'm curious if that command line (1) should work as it is because in my case I paste the echo $HOME or lsb_release -r|cut .d"." -f1 for getting that work out) and in .rpmmacros I get: -e %_topdir /home/dafh/rpmbuild %dist .el7.local What is the meaning of doing (1)? What is right here? I'm not going to continue until I verify this! Thanks 2016-01-23 15:48 GMT-03:00 Diego Farias <dnfar...@uc.cl>: > Hi Steve, I'm doing what you proposed and I just want to say that at 4) > Install (new) kernel, everything is fine; > > Installing : kernel-3.10.0-327.4.4.el7.x86_64 > 1/1 > Error! Build of psmouse.ko failed for: 3.10.0-327.4.4.el7.x86_64 (x86_64) > Consult the make.log in the build directory > /var/lib/dkms/psmouse/alps-1.3/build/ for more information. > Verifying : > kernel-3.10.0-327.4.4.el7.x86_64 1/1 > > Installed: > kernel.x86_64 0:3.10.0-327.4.4.el7 > > About that psmouse, now I know why I don't have touchpad? (I don't know > who I supossed to report this). I'll continue with the list and comment the > installation of kmod-wl after rebooting. > > 2016-01-18 20:51 GMT-03:00 Diego Farias <dnfar...@uc.cl>: > >> Yes, I made a mistake in the last message, but I'm sure I did it alright >> (rpmbuild as non-root wl-kmod...rpm) >> It says that was written the kmod-wl.rpm correctly at rpmbuild/RPMS/ and >> then rpm -Uvh kmod-wl. >> >> As a proof of that, >> >> rpm -q kmod-wl >> kmod-wl-6_30_223_271-2.el7.local.x86_64 >> >> I guess I'll remove the kernel and try again! >> >> Thanks Steve >> >> 2016-01-18 20:33 GMT-03:00 S.Tindall <s10...@elrepo.org>: >> >>> On Mon, 2016-01-18 at 20:09 -0300, Diego Farias wrote: >>> > Probably I made a stupid mistake in while I was following the >>> > instructions; I tried to build again the package but unsuccessfully: >>> > >>> > [dafh@dhcp121-83 ~]$ rpmbuild --rebuild --define 'packager dafh' >>> > rpmbuild/SOURCES/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz >>> > Installing >>> > rpmbuild/SOURCES/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz >>> > error: >>> > rpmbuild/SOURCES/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz >>> > cannot be installed >>> >>> Slight error. >>> >>> Look at the wl-kmod wiki page at step "5" (simplified below): >>> >>> http://elrepo.org/tiki/wl-kmod >>> >>> $ rpmbuild --rebuild --define 'packager <your-name>' \ >>> /<path-to-nosrc.rpm>/wl-kmod*nosrc.rpm >>> >>> You should "rebuild" the wl-kmod*nosrc.rpm, not the source tarball. >>> >>> You placed the source tarball in ~/rpmbuild/SOURCES/ so that it was >>> available for the srpm rebuild. >>> >>> >>> > I'm going to try the kernel solution. By the way, how am I sure that I >>> > removed kmod-wl? >>> >>> The rpm command will tell you: >>> >>> $ rpm -q kmod-wl >>> package kmod-wl is not installed >>> >>> Steve >>> >>> _______________________________________________ >>> elrepo mailing list >>> elrepo@lists.elrepo.org >>> http://lists.elrepo.org/mailman/listinfo/elrepo >>> >> >> >
_______________________________________________ elrepo mailing list elrepo@lists.elrepo.org http://lists.elrepo.org/mailman/listinfo/elrepo