Me problem is very similar. - lets say, the same... i can help debugging, too.
Markus Rechberger wrote: > On 9/11/07, Dirk K. <[EMAIL PROTECTED]> wrote: > >> On Tuesday 11 September 2007 13:47:22 Markus Rechberger wrote: >> >>> On 9/11/07, Dirk Keinowski <[EMAIL PROTECTED]> wrote: >>> >>>> Hallo, >>>> >>>> try this: >>>> >>>> modprobe em28xx card=16 >>>> modprobe em2880-dvb >>>> >>>> >>>> card=16 look at the Docu in "v4l", 16 = Terratec Hybrid XS >>>> >>>> Look at This Site: >>>> http://forum.ubuntuusers.de/topic/114888/ (Sorry, is in German). >>>> >>>> sorry for my bad english, I'm came from Germany and my last english >>>> school hour are 30years ago (is this a right sentence?), I'm 43Years >>>> >> old. >> >>> Have you tried to load the driver without the card=16 parameter?/ >>> Hast du schon versucht den Treiber ohne den "card=16" Parameter zu laden? >>> >>> Markus >>> >> Hallo Markus, >> >> Yes, here the message from "dmesg" without "card=16" >> Ja, hier die ausgabe von "dmesg" ohne "card=16" >> >> [ 308.260000] Em28xx: Removed (Em2880 DVB Extension) extension >> [ 328.816000] Em28xx: Removed (Em28xx Audio Extension) extension >> [ 332.648000] usbcore: deregistering interface driver em28xx >> [ 368.288000] em28xx v4l2 driver version 0.0.1 loaded >> [ 368.288000] usbcore: registered new interface driver em28xx >> [ 379.944000] Em28xx: Initialized (Em2880 DVB Extension) extension >> [ 437.396000] usb 1-5: new high speed USB device using ehci_hcd and address >> 4 >> [ 437.536000] usb 1-5: configuration #1 chosen from 1 choice >> [ 437.536000] em28xx new video device (0ccd:0047): interface 0, class 255 >> [ 437.536000] em28xx: device is attached to a USB 2.0 bus >> [ 437.536000] em28xx: you're using the experimental/unstable tree from >> mcentral.de >> [ 437.536000] em28xx: there's also a stable tree available but which is >> limited to >> [ 437.536000] em28xx: linux <=2.6.19.2 >> [ 437.536000] em28xx: it's fine to use this driver but keep in mind that it >> will move >> [ 437.536000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon >> as it's >> [ 437.536000] em28xx: proved to be stable >> [ 437.536000] em28xx #0: Alternate settings: 8 >> [ 437.536000] em28xx #0: Alternate setting 0, max size= 0 >> [ 437.536000] em28xx #0: Alternate setting 1, max size= 0 >> [ 437.536000] em28xx #0: Alternate setting 2, max size= 1448 >> [ 437.536000] em28xx #0: Alternate setting 3, max size= 2048 >> [ 437.536000] em28xx #0: Alternate setting 4, max size= 2304 >> [ 437.536000] em28xx #0: Alternate setting 5, max size= 2580 >> [ 437.536000] em28xx #0: Alternate setting 6, max size= 2892 >> [ 437.536000] em28xx #0: Alternate setting 7, max size= 3072 >> [ 437.676000] attach_inform: eeprom detected. >> [ 437.704000] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 47 00 50 12 5c 03 >> 6a 2e 98 12 >> [ 437.704000] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 >> 5b 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 >> 50 00 72 00 >> [ 437.704000] em28xx #0: i2c eeprom 70: 6f 00 64 00 69 00 67 00 79 00 20 00 >> 48 00 79 00 >> [ 437.704000] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 >> 56 00 20 00 >> [ 437.704000] em28xx #0: i2c eeprom 90: 55 00 53 00 42 00 00 00 12 03 50 00 >> 72 00 6f 00 >> [ 437.704000] em28xx #0: i2c eeprom a0: 64 00 69 00 67 00 79 00 00 00 67 00 >> 79 00 20 00 >> [ 437.704000] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 >> 20 00 54 00 >> [ 437.704000] em28xx #0: i2c eeprom c0: 56 00 20 00 55 00 53 00 42 00 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 >> [ 437.704000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 >> [ 437.704000] EEPROM ID= 0x9567eb1a >> [ 437.704000] Vendor/Product ID= 0ccd:0047 >> [ 437.704000] AC97 audio (5 sample rates) >> [ 437.704000] 500mA max power >> [ 437.704000] Table at 0x06, strings=0x2e6a, 0x1298, 0x0000 >> [ 437.704000] tuner 5-0061: chip found @ 0xc2 (em28xx #0) >> [ 437.704000] attach inform (default): detected I2C address c2 >> [ 437.704000] tuner 0x61: Configuration acknowledged >> [ >> 437.704000] >> /home/install/download/source/v4l/v4l-dvb-experimental/v4l/xc3028-tuner.c: >> attach request! >> [ 437.704000] BUG: unable to handle kernel paging request at virtual >> address >> 726f66a2 >> [ 437.704000] printing eip: >> [ 437.704000] f9237cd3 >> [ 437.704000] *pde = 00000000 >> [ 437.704000] Oops: 0002 [#1] >> [ 437.704000] SMP >> [ 437.704000] Modules linked in: tvp5150 em2880_dvb em28xx binfmt_misc >> rfcomm >> l2cap bluetooth ppdev powernow_k8 cpufreq_userspace cpufreq_stats >> cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative >> tc1100_wmi >> pcc_acpi dev_acpi sony_acpi video led_class sbs i2c_ec dock button battery >> container ac asus_acpi backlight af_packet ext3 jbd qt1010 mt2060 >> xc3028_tuner mt352 zl10353 dvb_core tuner compat_ioctl32 ir_common videodev >> v4l2_common v4l1_compat tveeprom sbp2 parport_pc lp parport fuse >> snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy >> snd_seq_oss wlan_wep snd_seq_midi snd_rawmidi snd_seq_midi_event irtty_sir >> usbhid sir_dev sdhci snd_seq snd_timer snd_seq_device wlan_scan_sta irda >> joydev ide_cd nvidia(P) hid mmc_core snd soundcore agpgart ath_rate_sample >> cdrom crc_ccitt ath_pci wlan ath_hal(P) i2c_nforce2 snd_page_alloc psmouse >> k8temp pcspkr serio_raw i2c_core shpchp pci_hotplug tsdev evdev ipv6 ext2 >> mbcache sg sd_mod r8169 ohci1394 ieee1394 ohci_hcd ehci_hcd usbcore amd74xx >> sata_nv ata_generic libata scsi_mod generic thermal processor fan capability >> commoncap vesafb fbcon tileblit font bitblit softcursor >> [ 437.704000] CPU: 0 >> [ 437.704000] EIP: 0060:[<f9237cd3>] Tainted: P VLI >> [ 437.704000] EFLAGS: 00010202 (2.6.20-16-generic #2) >> [ 437.704000] EIP is at xc3028_attach+0x33/0x154 [xc3028_tuner] >> [ 437.704000] eax: 726f666e ebx: f4757b80 ecx: 00000046 edx: 00000000 >> [ 437.704000] esi: f9304100 edi: f7a8606c ebp: f4757b80 esp: dfd9b720 >> [ 437.704000] ds: 007b es: 007b ss: 0068 >> [ 437.704000] Process khubd (pid: 2111, ti=dfd9a000 task=dfe1e560 >> task.ti=dfd9a000) >> [ 437.704000] Stack: f9238013 f92384e0 f48fb400 f9304100 f48fb400 f9310db7 >> f48fb400 f48fb57c >> [ 437.704000] f48fb414 f8fecaec f48fb4cc 00000014 f8fecc68 00000005 >> 00000061 0000000e >> [ 437.704000] 00000047 f9237ca0 00000000 f48fb400 00000000 00000000 >> f7a8606c f93113f5 >> [ 437.708000] Call Trace: >> [ 437.708000] [<f9310db7>] set_type+0x267/0x400 [tuner] >> [ 437.708000] [<f8fecaec>] i2c_attach_client+0x18c/0x1f0 [i2c_core] >> [ 437.708000] [<f9237ca0>] xc3028_attach+0x0/0x154 [xc3028_tuner] >> [ 437.708000] [<f93113f5>] tuner_attach+0x225/0x330 [tuner] >> [ 437.708000] [<f8febb3e>] i2c_probe_address+0x3e/0x130 [i2c_core] >> [ 437.708000] [<f8febe3a>] i2c_probe+0x20a/0x220 [i2c_core] >> [ 437.708000] [<f93111d0>] tuner_attach+0x0/0x330 [tuner] >> [ 437.708000] [<f93111d0>] tuner_attach+0x0/0x330 [tuner] >> [ 437.708000] [<f8fec69e>] i2c_add_adapter+0x1be/0x270 [i2c_core] >> [ 437.708000] [<f92fd482>] em28xx_i2c_register+0x82/0x120 [em28xx] >> [ 437.708000] [<f92fed4b>] em28xx_write_regs+0x1b/0x20 [em28xx] >> [ 437.708000] [<f92fdc48>] em28xx_card_setup+0x58/0xb10 [em28xx] >> [ 437.708000] [<f92f8a8b>] em28xx_init_dev+0x16b/0x7d0 [em28xx] >> [ 437.708000] [<f92f9660>] em28xx_usb_probe+0x360/0x19b0 [em28xx] >> [ 437.708000] [<c025aaaf>] dma_pool_alloc+0x18f/0x1f0 >> [ 437.708000] [<c025aaaf>] dma_pool_alloc+0x18f/0x1f0 >> [ 437.708000] [<f8ec901a>] qh_urb_transaction+0xca/0x320 [ehci_hcd] >> [ 437.708000] [<f8ec6589>] qh_link_async+0x69/0xc0 [ehci_hcd] >> [ 437.708000] [<f8ec98d1>] ehci_urb_enqueue+0xf1/0xd40 [ehci_hcd] >> [ 437.708000] [<c01f1144>] vsnprintf+0x2f4/0x5f0 >> [ 437.708000] [<c01edea0>] add_uevent_var+0x80/0xa0 >> [ 437.708000] [<f8ef7b6b>] usb_uevent+0x28b/0x2a0 [usbcore] >> [ 437.708000] [<c0130180>] lock_timer_base+0x20/0x50 >> [ 437.708000] [<c01301f7>] try_to_del_timer_sync+0x47/0x50 >> [ 437.708000] [<f8ef6fcc>] usb_resume_both+0x5c/0xd0 [usbcore] >> [ 437.708000] [<f8ef71e5>] usb_autopm_do_device+0x65/0xe0 [usbcore] >> [ 437.708000] [<f8ef7c86>] usb_probe_interface+0x96/0xe0 [usbcore] >> [ 437.708000] [<c0257b66>] really_probe+0x66/0x190 >> [ 437.708000] [<c0257cd9>] driver_probe_device+0x49/0xc0 >> [ 437.708000] [<c02ec043>] klist_next+0x53/0xa0 >> [ 437.708000] [<c0256f44>] bus_for_each_drv+0x44/0x70 >> [ 437.708000] [<c0257e00>] device_attach+0x90/0xa0 >> [ 437.708000] [<c0257d50>] __device_attach+0x0/0x10 >> [ 437.708000] [<c0256e86>] bus_attach_device+0x26/0x60 >> [ 437.708000] [<c0255d15>] device_add+0x455/0x530 >> [ 437.708000] [<f8ef5f91>] usb_set_configuration+0x3f1/0x4d0 [usbcore] >> [ 437.708000] [<f8efda84>] generic_probe+0x164/0x230 [usbcore] >> [ 437.708000] [<f8ef78d3>] usb_probe_device+0x33/0x40 [usbcore] >> [ 437.708000] [<c0257b66>] really_probe+0x66/0x190 >> [ 437.708000] [<c0257cd9>] driver_probe_device+0x49/0xc0 >> [ 437.708000] [<c02ec043>] klist_next+0x53/0xa0 >> [ 437.708000] [<c0256f44>] bus_for_each_drv+0x44/0x70 >> [ 437.708000] [<c0257e00>] device_attach+0x90/0xa0 >> [ 437.708000] [<c0257d50>] __device_attach+0x0/0x10 >> [ 437.708000] [<c0256e86>] bus_attach_device+0x26/0x60 >> [ 437.708000] [<c0255d15>] device_add+0x455/0x530 >> [ 437.708000] [<f8ef1462>] __usb_new_device+0x92/0x120 [usbcore] >> [ 437.708000] [<f8ef281e>] hub_thread+0x78e/0xc20 [usbcore] >> [ 437.708000] [<c013ae00>] autoremove_wake_function+0x0/0x50 >> [ 437.708000] [<f8ef2090>] hub_thread+0x0/0xc20 [usbcore] >> [ 437.708000] [<c013ac4a>] kthread+0xba/0xf0 >> [ 437.708000] [<c013ab90>] kthread+0x0/0xf0 >> [ 437.708000] [<c01044c7>] kernel_thread_helper+0x7/0x10 >> [ 437.708000] ======================= >> [ 437.708000] Code: c3 83 ec 08 c7 44 24 04 e0 84 23 f9 c7 04 24 13 80 23 >> f9 >> e8 50 ef ee c6 85 f6 0f 84 12 01 00 00 8b 46 08 85 c0 0f 84 db 00 00 00 <83> >> 40 34 01 89 c2 89 78 0c 8b 06 89 42 1c be 4c 7e 23 f9 8d 7b >> [ 437.708000] EIP: [<f9237cd3>] xc3028_attach+0x33/0x154 [xc3028_tuner] >> SS:ESP 0068:dfd9b720 >> [ 437.708000] >> >> > > ok first lets try a clean reinstall of the drivers. > > run: > rm -rf /lib/modules/`uname -r`/kernel/drivers/media > > and follow the installation instruction again: > http://mcentral.de/wiki/index.php/Em2880#Installation > > Wenn du willst können wir debugging auch ohne die Liste machen und zum > Schluss das Resultat posten. > > Gruß, > Markus > > _______________________________________________ > Em28xx mailing list > Em28xx@mcentral.de > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
