2007/9/12, Markus Rechberger <[EMAIL PROTECTED]>: > > On 9/12/07, Valerio Bontempi <[EMAIL PROTECTED]> wrote: > > 2007/9/11, Aidan Thornton <[EMAIL PROTECTED]>: > > > > > > On 9/11/07, Valerio Bontempi <[EMAIL PROTECTED]> wrote: > > > > Hi Markus, > > > > > > > > I have a problem with a Terratec adapter Cinergy USB T XS and kernel > > > 2.16.20 > > > > too. > > > > (with kernel 2.16.18 everything works well) > > > > This is the message found in dmesg: > > > > > > > > [ 2438.614225 > > > > ] /usr/local/src/v4l-dvb/v4l/tuner-core.c: setting tuner > > > > callback > > > > [ 2438.614343] /usr/local/src/v4l-dvb/v4l/tuner-core.c: > > > > setting tuner > > > > callback > > > > [ 2438.619249] tuner 1-0061: Tuner has no way to set tv freq > > > > > > > > [ 2438.619367] em28xx #0: Found Terratec Cinergy T XS > > > > [ 2438.619472] usbcore: registered new interface driver em28xx > > > > [ 2438.655151] em2880-dvb.c: DVB Init > > > > [ 2438.757779] FIXME:em28xx_i2c_send_bytes(1e): write > > > > failed: > > > > > > > > [ 2438.757786] =============================== > > > > [ 2438.757787] 7f > > > > [ 2438.757789] ================================ > > > > [ 2438.759026] zl10353_read_register: readreg error (reg=127, > ret==-19) > > > > [ 2438.759125] em2880-dvb.c > > > > : failed initializing zl10353 DVB-T demodulator > > > > [ 2438.759128] em2880-dvb.c: retrying with mt352 DVB-T demodulator > > > > [ 2438.760024] FIXME:em28xx_i2c_send_bytes(1e): write > > > > failed: > > > > [ 2438.760027] =============================== > > > > > > > > [ 2438.760029] 7f > > > > [ 2438.760030] ================================ > > > > [ 2438.761024] mt352_read_register: readreg error (reg=127, > ret==-19) > > > > [ 2438.761053] em2880-dvb.c: no luck with mt352 demodulator, not > > > attaching > > > > > > > > em2880-dvb > > > > [ 2438.761056] em2880-dvb.c: DVB-T demodulator not reachable, did > you > > > try > > > > "modprobe em28xx device_mode=1" > > > > [ 2438.761059] Em28xx: Initialized (Em2880 DVB Extension) extension > > > > > > > > I tried also device_mode = 1 without any effect. > > > > > > > > Do you know the reason for this problem (met only using new kernel > > > 2.16.20)? > > > > Thanks and regards, > > > > > > > > Valerio > > > > _______________________________________________ > > > > > > Looks like something's gone horribly wrong with the tuner driver. (All > > > the subsequent write failure and demodulator not reachable errors are > > > probably irrelevant; the GPIO-twiddling to bring the demodulator out > > > of standby is done in a callback from the tuner driver, and so they're > > > most likely due to it still being in standby.) > > > > > > Which driver are you using (v4l-dvb-stable, v4l-dvb-experimental, > > > userspace, ...)? Are there any other errors before the ones you've > > > pasted? (Unfortunately, I don't know the tuner driver well enough to > > > figure out what's causing it, but I doubt it's firmware-related.) > > > > > > > I'm using v4l-dvb-stable driver (but experimental one has the same > error) > > > > Following all the /var/log/messages after modprobe em2880-dvb > > > > Sep 12 10:41:48 gandalf kernel: [ 193.964000] em28xx v4l2 driver > version > > 0.0.1 loaded > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: device is > attached to > > a USB 2.0 bus > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: you're using the > > experimental/unstable tree from mcentral.de > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: there's also a > stable > > tree available but which is limited to > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: linux <=2.6.19.2 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: it's fine to use > this > > driver but keep in mind that it will move > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: to > > http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx: proved to be > stable > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > > settings: 8 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 0, max size= 0 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 1, max size= 0 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 2, max size= 1448 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 3, max size= 2048 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 4, max size= 2304 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 5, max size= 2580 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 6, max size= 2892 > > Sep 12 10:41:48 gandalf kernel: [ 194.084000] em28xx #0: Alternate > setting > > 7, max size= 3072 > > Sep 12 10:41:48 gandalf kernel: [ 194.096000] attach_inform: eeprom > > detected. > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 00: > 1a > > eb 67 95 cd 0c 43 00 c0 12 5c 00 9e 24 6a 34 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 10: > 00 > > 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 20: > 44 > > 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 30: > 00 > > 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 40: > 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 50: > 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 60: > 00 > > 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 70: > 72 > > 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 80: > 6c > > 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom 90: > 63 > > 00 20 00 47 00 6d 00 62 00 48 00 00 00 24 03 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom a0: > 43 > > 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom b0: > 54 > > 00 20 00 55 00 53 00 42 00 20 00 58 00 53 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom c0: > 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom d0: > 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom e0: > 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] em28xx #0: i2c eeprom f0: > 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] EEPROM ID= 0x9567eb1a > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] Vendor/Product ID= > 0ccd:0043 > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] No audio on board. > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] 500mA max power > > Sep 12 10:41:48 gandalf kernel: [ 194.124000] Table at 0x06, > > strings=0x249e, 0x346a, 0x0000 > > Sep 12 10:41:48 gandalf kernel: [ 194.128000] tuner 2-0061: chip found > @ > > 0xc2 (em28xx #0) > > Sep 12 10:41:48 gandalf kernel: [ 194.128000] attach inform (default): > > detected I2C address c2 > > Sep 12 10:41:48 gandalf kernel: [ 194.128000] > > /usr/local/src/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback > > Sep 12 10:41:48 gandalf kernel: [ 194.128000] > > /usr/local/src/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback > > Sep 12 10:41:48 gandalf kernel: [ 194.136000] tuner 2-0061: Tuner has > no > > way to set tv freq > > Sep 12 10:41:48 gandalf kernel: [ 194.136000] em28xx #0: Found Terratec > > Cinergy T XS > > Sep 12 10:41:48 gandalf kernel: [ 194.136000] usbcore: registered new > > interface driver em28xx > > Sep 12 10:41:48 gandalf kernel: [ 194.156000] em2880-dvb.c: DVB Init > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] > > FIXME:em28xx_i2c_send_bytes(1e): write failed: > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] > > =============================== > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] 7f > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] > > ================================ > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] zl10353_read_register: > > readreg error (reg=127, ret==-19) > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] em2880-dvb.c: failed > > initializing zl10353 DVB-T demodulator > > Sep 12 10:41:48 gandalf kernel: [ 194.260000] em2880-dvb.c: retrying > with > > mt352 DVB-T demodulator > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] > > FIXME:em28xx_i2c_send_bytes(1e): write failed: > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] > > =============================== > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] 7f > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] > > ================================ > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] mt352_read_register: > readreg > > error (reg=127, ret==-19) > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] em2880-dvb.c: no luck > with > > mt352 demodulator, not attaching em2880-dvb > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] em2880-dvb.c: DVB-T > > demodulator not reachable, did you try "modprobe em28xx device_mode=1" > > Sep 12 10:41:48 gandalf kernel: [ 194.264000] Em28xx: Initialized > (Em2880 > > DVB Extension) extension > > > > Note that everything worked well with old kernel 2.16.18 on openSuse > 10.2 > > > > Can I use some specific configuration in compiling the driver? > > seems like wrong GPIO values for switching the device to DVB-T > although it would be interesting if there's any other user with such a > device which works. I know it has been supported a longer time ago but > Terratec might have updated the device too. > > Markus >
Hi Marks, which could be the reason that makes this drivers to work fine with kernel 2.16.18 and not with 2.16.20 one? Valerio -- ********************************************* Valerio Bontempi Blog: http://mithland.wordpress.com/ *********************************************
_______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
