Markus,
I tried putting an "msleep(5)" on both sides of the usb_control_msg
calls (wasn't sure which side you were referring to). Other than being
significantly slower, it didn't work any differently. If anything it
was worse. There are more errors when running tvtime and when I
unplugged the tuner, my entire system froze.
Is there anything else I can try? I have a much older MSI USB Vox II (I
believe). Would I have any better luck with that?
Thanks,
Craig
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/setera/.tvtime/tvtime.xml
videoinput: Driver won't tell us its input: Input/output error
videoinput: Driver won't tell us input info: Input/output error
videoinput: Driver won't tell us its norm: Input/output error
videoinput: Can't get tuner info: Input/output error
Your capture card driver: em28xx [Pinnacle PCTV HD Pro/2-8/1]
does not support studio-quality colour images required by tvtime.
This is a hardware limitation of some cards including many
low-quality webcams. Please select a different video device to use
with the command line option --device.
Message from the card was: Input/output error
> Analogue TV is working; DVB-T is not.
> Craig, you might try to add a delay msleep(5); right everywhere in the
> driver where usb_control_msg is called in em28xx-core.c ..
>
> Markus
>
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
