Hi, hope this is no duplicate but I think my last post was from the wrong address.
up to yesterday my terratec cynergy ts worked fine with kernel 2.6.18.5 and the v4l-kernel modules from mcentral. In the course of upgrading to a newer kernel while testing I also used the stable version of the v4l-dvb from mcentral and now I am in trouble :-( Usb, DVB-T stick Cynergy XS (not hybrid): lsusb: ID 0ccd:0043 TerraTec Electronic GmbH v4l-dvb-stable doesn't seem to contain dvb2880-dvb which I need so I used v4l-dvb (= v4l-dvb-kernel, checked with diff -r --brief): hg clone http://mcentral.de/hg/~mrec/v4l-dvb I did _not_ use v4l-dvb-experimental though dmesg tells me that. I did try the option "device_mode=1" for em28xx. I rebooted between the trials. There are just no devices created. The lines: FIXME:em28xx_i2c_send_bytes(1e): write failed: =============================== 7f in dmesg are similar to the ones in FAQ1 but I compiled I2C as a module. - The same problem applies to kernel 2.6.22.6 with v4l-dvb-experimental I post now the output of dmesg and the relevant (differing) parts of /var/log/syslog of yesterdays successfull load of em2880-dvb. If I overlooked something obvious please excuse me and just drop me a line where to look. Thanks, Roland Please tell me if you need any further information --------------output of dmesg ----------------- Linux video capture interface: v2.00 em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (0ccd:0043): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx: you're using the experimental/unstable tree from mcentral.de em28xx: there's also a stable tree available but which is limited to em28xx: linux <=2.6.19.2 em28xx: it's fine to use this driver but keep in mind that it will move em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's em28xx: proved to be stable em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 xc3028_tuner: Unknown symbol tuner_core_unregister xc3028_tuner: Unknown symbol tuner_core_register attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 5c 00 9e 24 6a 34 em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 24 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 54 00 20 00 55 00 53 00 42 00 20 00 58 00 53 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 0ccd:0043 No audio on board. 500mA max power Table at 0x06, strings=0x249e, 0x346a, 0x0000 em28xx #0: Found Terratec Cinergy T XS usbcore: registered new driver em28xx xc3028_tuner: Unknown symbol tuner_core_unregister xc3028_tuner: Unknown symbol tuner_core_register em2880-dvb.c: DVB Init FIXME:em28xx_i2c_send_bytes(1e): write failed: =============================== 7f ================================ zl10353_read_register: readreg error (reg=127, ret==-19) em2880-dvb.c: failed initializing zl10353 DVB-T demodulator em2880-dvb.c: retrying with mt352 DVB-T demodulator FIXME:em28xx_i2c_send_bytes(1e): write failed: =============================== 7f ================================ mt352_read_register: readreg error (reg=127, ret==-19) em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1" Em28xx: Initialized (Em2880 DVB Extension) extension --------------------------- end output of dmesg ------------------------- ----------------- successfull load in /var/log/syslog ------------------- EEPROM ID= 0x9567eb1a Vendor/Product ID= 0ccd:0043 No audio on board. 500mA max power Table at 0x06, strings=0x249e, 0x346a, 0x0000 tuner 0-0061: chip found @ 0xc2 (em28xx #0) EEPROM ID= 0x9567eb1a Vendor/Product ID= 0ccd:0043 No audio on board. 500mA max power Table at 0x06, strings=0x249e, 0x346a, 0x0000 tuner 0-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 Tuner: setting up tuner core extension for: Xceive 3028 Tuner Loading base firmware: xc3028_8MHz_init0.i2c.fw Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw xc3028-tuner.c: sending extra call for DVB-T Loading base firmware: xc3028_init0.i2c.fw Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw em28xx-video.c: requesting em2880-dvb! em28xx #0: Found Terratec Cinergy T XS usbcore: registered new driver em28xx Tuner: registering extension (MT2060 Silicon Tuner) em2880-dvb.c: DVB Init Loading base firmware: xc3028_8MHz_init0.i2c.fw Loading default dtv settings: xc3028_DTV8_2633.i2c.fw xc3028-tuner.c: sending extra call for DVB-T DVB: registering new adapter (em2880 DVB-T). DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... Em28xx: Initialized (Em2880 DVB Extension) extension --------------------- end of successful load ---------------------------- -- -------------------------------------------- Roland Marcus Rutschmann <[EMAIL PROTECTED]> -------------------------------------------- _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
