Hi, I'm trying to use my Empire Dual Pen (which is a Kworld 310U rebranded) to see analogical tv, but I can't listen the audio. I've followed the installation step, but I've seen that the card is not correctly configured (It is recognised as a MSI DigiVox A/D as you can see by the dmesg output ) and so I can use it only for digital television. I've also tried to load the module passing the card=28 option, but doing so it is recognized as a kworl 310U but it doesn't work even for the digital tv (you can see the dmesg output that I obtain In such a case below dmesg2"). Has someone managed to install an Empire Dual Pen or a Kworld 310U? It's almost a year I'm struggling with this problem!!! Thank you for your help, Xwang
dmseg output (without card option): [21747.112000] usb 3-3: new high speed USB device using ehci_hcd and address 5 [21747.244000] usb 3-3: configuration #1 chosen from 1 choice [21747.248000] em28xx new video device (eb1a:e310): interface 0, class 255 [21747.248000] em28xx: device is attached to a USB 2.0 bus [21747.248000] em28xx: you're using the experimental/unstable tree from mcentral .de [21747.248000] em28xx: there's also a stable tree available but which is limited to [21747.248000] em28xx: linux <=2.6.19.2 [21747.248000] em28xx: it's fine to use this driver but keep in mind that it wil l move [21747.248000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's [21747.248000] em28xx: proved to be stable [21747.248000] em28xx #0: Alternate settings: 8 [21747.248000] em28xx #0: Alternate setting 0, max size= 0 [21747.248000] em28xx #0: Alternate setting 1, max size= 0 [21747.248000] em28xx #0: Alternate setting 2, max size= 1448 [21747.248000] em28xx #0: Alternate setting 3, max size= 2048 [21747.248000] em28xx #0: Alternate setting 4, max size= 2304 [21747.248000] em28xx #0: Alternate setting 5, max size= 2580 [21747.248000] em28xx #0: Alternate setting 6, max size= 2892 [21747.248000] em28xx #0: Alternate setting 7, max size= 3072 [21747.500000] attach_inform: eeprom detected. [21747.524000] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00 [21747.524000] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [21747.524000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [21747.524000] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00 [21747.524000] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [21747.524000] EEPROM ID= 0x9567eb1a [21747.524000] Vendor/Product ID= eb1a:e310 [21747.524000] AC97 audio (5 sample rates) [21747.524000] 500mA max power [21747.524000] Table at 0x04, strings=0x226a, 0x0000, 0x0000 [21747.528000] tuner 3-0061: chip found @ 0xc2 (em28xx #0) [21747.528000] attach inform (default): detected I2C address c2 [21747.528000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner cal lback [21747.528000] tuner 0x61: Configuration acknowledged [21747.528000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner cal lback [21747.528000] /usr/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! [21747.528000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner succ essfully loaded [21747.532000] attach_inform: tvp5150 detected. [21747.600000] tvp5150 3-005c: tvp5150am1 detected. [21747.688000] Loading base firmware: xc3028_init0.i2c.fw [21748.700000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw [21748.756000] xc3028-tuner.c: firmware 2.7 [21748.756000] ANALOG TV REQUEST [21748.760000] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [21748.764000] em28xx #0: V4L2 device registered as /dev/video0 [21748.764000] em2880-dvb.c: DVB Init [21748.764000] Loading base firmware: xc3028_8MHz_init0.i2c.fw [21749.852000] Loading specific dtv settings: xc3028_DTV6_ATSC_2620.i2c.fw [21749.884000] xc3028-tuner.c: firmware 2.7 [21749.884000] Sending extra call for Digital TV! [21749.988000] /usr/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! [21749.996000] DVB: registering new adapter (em2880 DVB-T) [21749.996000] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... [21749.996000] em28xx #0: Found MSI DigiVox A/D [21749.996000] em28xx new video device (eb1a:e310): interface 1, class 255 [21749.996000] em28xx probing error: endpoint is non-ISO endpoint! [21750.344000] Inbound IN=eth1 OUT= MAC=00:04:23:84:5b:42:00:0c:f6:32:f3:d3:08:0 0 SRC=192.168.0.1 DST=192.168.0.101 LEN=28 TOS=0x00 PREC=0x00 TTL=254 ID=60460 P ROTO=ICMP TYPE=0 CODE=0 ID=22869 SEQ=0 dmesg2 (with card=28 option) [22504.024000] Em28xx: Initialized (Em2880 DVB Extension) extension [22507.064000] usb 3-3: new high speed USB device using ehci_hcd and address 6 [22507.196000] usb 3-3: configuration #1 chosen from 1 choice [22507.200000] em28xx new video device (eb1a:e310): interface 0, class 255 [22507.200000] em28xx: device is attached to a USB 2.0 bus [22507.200000] em28xx: you're using the experimental/unstable tree from mcentral.de [22507.200000] em28xx: there's also a stable tree available but which is limited to [22507.200000] em28xx: linux <=2.6.19.2 [22507.200000] em28xx: it's fine to use this driver but keep in mind that it will move [22507.200000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's [22507.200000] em28xx: proved to be stable [22507.200000] em28xx #0: Alternate settings: 8 [22507.200000] em28xx #0: Alternate setting 0, max size= 0 [22507.200000] em28xx #0: Alternate setting 1, max size= 0 [22507.200000] em28xx #0: Alternate setting 2, max size= 1448 [22507.200000] em28xx #0: Alternate setting 3, max size= 2048 [22507.200000] em28xx #0: Alternate setting 4, max size= 2304 [22507.200000] em28xx #0: Alternate setting 5, max size= 2580 [22507.200000] em28xx #0: Alternate setting 6, max size= 2892 [22507.200000] em28xx #0: Alternate setting 7, max size= 3072 [22507.348000] attach_inform: eeprom detected. [22507.376000] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00 [22507.376000] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [22507.376000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [22507.376000] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00 [22507.376000] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [22507.376000] EEPROM ID= 0x9567eb1a [22507.376000] Vendor/Product ID= eb1a:e310 [22507.376000] AC97 audio (5 sample rates) [22507.376000] 500mA max power [22507.376000] Table at 0x04, strings=0x226a, 0x0000, 0x0000 [22507.376000] tuner 3-0061: chip found @ 0xc2 (em28xx #0) [22507.376000] attach inform (default): detected I2C address c2 [22507.376000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback [22507.376000] tuner 0x61: Configuration acknowledged [22507.376000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback [22507.376000] /usr/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! [22507.376000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded [22507.384000] attach_inform: tvp5150 detected. [22507.448000] tvp5150 3-005c: tvp5150am1 detected. [22507.536000] Loading base firmware: xc3028_init0.i2c.fw [22508.436000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw [22508.460000] xc3028-tuner.c: firmware 2.7 [22508.460000] ANALOG TV REQUEST [22508.464000] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [22508.468000] em28xx #0: V4L2 device registered as /dev/video0 [22508.468000] em2880-dvb.c: DVB Init [22508.468000] em2880-dvb.c: unsupported device [22508.468000] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator [22508.468000] em2880-dvb.c: retrying with mt352 DVB-T demodulator [22508.468000] em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb [22508.468000] em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1" [22508.468000] em28xx #0: Found KWorld DVB-T 310U [22508.468000] em28xx new video device (eb1a:e310): interface 1, class 255 [22508.468000] em28xx probing error: endpoint is non-ISO endpoint! _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
