Hi markus, I've tested the driver @ home and the driver seems work Here the dmesg: [ 2332.643948] em28xx new video device (2304:0226): interface 0, class 255 [ 2332.643953] em28xx: device is attached to a USB 2.0 bus [ 2332.643958] em28xx #0: Alternate settings: 8 [ 2332.643961] em28xx #0: Alternate setting 0, max size= 0 [ 2332.643963] em28xx #0: Alternate setting 1, max size= 0 [ 2332.643966] em28xx #0: Alternate setting 2, max size= 1448 [ 2332.643968] em28xx #0: Alternate setting 3, max size= 2048 [ 2332.643970] em28xx #0: Alternate setting 4, max size= 2304 [ 2332.643973] em28xx #0: Alternate setting 5, max size= 2580 [ 2332.643975] em28xx #0: Alternate setting 6, max size= 2892 [ 2332.643978] em28xx #0: Alternate setting 7, max size= 3072 [ 2333.062995] moduleid: 1 [ 2333.066386] attach_inform: eeprom detected. [ 2333.093847] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c [ 2333.093860] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 [ 2333.093869] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [ 2333.093878] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 [ 2333.093886] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2333.093894] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2333.093902] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 [ 2333.093910] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 [ 2333.093918] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 [ 2333.093926] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00 [ 2333.093934] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 34 00 30 00 [ 2333.093942] em28xx #0: i2c eeprom b0: 31 00 38 00 38 00 37 00 32 00 36 00 33 00 00 00 [ 2333.093950] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2333.093958] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2333.093966] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2333.093974] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2333.093982] EEPROM ID= 0x9567eb1a [ 2333.093984] Vendor/Product ID= 2304:0226 [ 2333.093987] AC97 audio (5 sample rates) [ 2333.093989] 500mA max power [ 2333.093991] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a [ 2333.096848] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [ 2333.096895] attach inform (default): detected I2C address c2 [ 2333.102978] attach_inform: tvp5150 detected. [ 2333.197103] em28xx: registered module_id 1 [ 2333.197136] requesting to change mode [ 2333.402578] requesting to change mode [ 2334.605832] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 2334.607107] em28xx #0: V4L2 device registered as /dev/video0 [ 2334.607113] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 2334.607116] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 2334.607409] em2880-dvb.c: DVB Init [ 2334.607603] requesting to change mode [ 2334.607605] switching to digital TV [ 2335.727703] requesting drx3975d driver! [ 2335.727871] drx3975d_callback not implemented (2) [ 2337.027495] trying to reattach tuner! [ 2337.027739] requesting to change mode [ 2337.233865] requesting to change mode [ 2338.455604] DVB: registering new adapter (em2880 DVB-T) [ 2338.455618] DVB: registering frontend 0 ((userspace) drx3975d)... [ 2338.455997] em28xx #0: Found Pinnacle Hybrid Pro (2)
But kaffeine can't find a channels: Here a scan with kaffeine --verbose: DvbCam::probe(): /dev/dvb/adapter0/ca0: : Aucun fichier ou répertoire de ce type Using DVB device 0:0 "(userspace) drx3975d" tuning DVB-T to 498000000 Hz inv:2 bw:0 fecH:1 fecL:9 mod:1 tm:1 gi:0 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "(userspace) drx3975d" tuning DVB-T to 602000000 Hz inv:2 bw:0 fecH:1 fecL:9 mod:1 tm:1 gi:0 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "(userspace) drx3975d" tuning DVB-T to 738000000 Hz inv:2 bw:0 fecH:1 fecL:9 mod:1 tm:1 gi:0 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "(userspace) drx3975d" tuning DVB-T to 778000000 Hz inv:2 bw:0 fecH:1 fecL:9 mod:1 tm:1 gi:0 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "(userspace) drx3975d" tuning DVB-T to 802000000 Hz inv:2 bw:0 fecH:1 fecL:9 mod:1 tm:1 gi:0 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Transponders: 5 dvbsi: The end :) Channels found: 0 thanks Manu > Message du 20/02/08 12:35 > De : "Markus Rechberger" <[EMAIL PROTECTED]> > A : "Barraud Manuel" <[EMAIL PROTECTED]> > Copie à : [email protected] > Objet : Re: Pinnacle 330e on ubuntu Good News > > On 2/20/08, Barraud Manuel <[EMAIL PROTECTED]> wrote: > > Markus Rechberger a écrit : > > > Hi Manuel, > > > > > > On 2/20/08, Barraud Manuel <[EMAIL PROTECTED]> wrote: > > > > > >> Hi markus, > > >> Very good news, > > >> > > >> My packages was tested succesfully by a user :) and it worked perfectly > > !!!! > > >> > > >> > > >> I can published them! > > >> > > >> > > >> Thanks for the good work :) > > >> > > >> > > > > > > perfect! thanks alot for the package! :) > > > > > > I can host it on mcentral.de! > > > > > > Markus > > > > > > > > > > > Ok i'll send it when it's ready. We have make some command (modprobe) > > that isn't include in the package. > > I must rewrite the package with the missing command. > > The package of the driver is very small BUT the kernel-image not (20 mb). > > No problems with that? > > > > storage is no problem. > > Although why do you need the kernel image? you could build it against > the current kernel? > Please use the latest version of it I added some bugfixes and signal > detection for it. > I'm going to add support for some more newer devices during the next > few weeks/months and also support for the old devices to the code, so > a regular update can be expected. > > Markus > > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
