On 2/23/08, Stefano De Dionigi <[EMAIL PROTECTED]> wrote: > Hello everybody, > > i have a HVR-900 B2C0, which worked previously in analog mode with the > em28xx driver supplied by Markus. > > I read about the new userspace drivers, that should allow me to use > also the DVB-T part of my card and i decided > to install them. > > I'm running a 2.6.24 kernel on a ArchLinux distribution. > > I downloaded and compiled "userspace_drivers" and "em28xx_userspace", > both of them through the build.sh script and none of them reported > errors. > But i can't get to have a /dev/dvb device, as there seems to be some > problems with the tuner initialization. > > dmesg reports this: > > em28xx new video device (2040:6502): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > moduleid: 1 > tuner daemon not initialized > tuner daemon not initialized > tuner 1-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > attach_inform: tvp5150 detected. > em28xx #0: AC97 command still being executed: not handled properly! > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > em28xx-audio.c: probing for em28x1 non standard usbaudio > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > em2880-dvb.c: DVB Init > requesting to change mode > switching to digital TV > requesting drx3975d driver! > tuner daemon not initialized > em2880-dvb.c: failed initializing zl10353 DVB-T demodulator > em2880-dvb.c: retrying with mt352 DVB-T demodulator > FIXME:em28xx_i2c_send_bytes(1e): write failed: > =============================== > 7f > ================================ > mt352_read_register: readreg error (reg=127, ret==-19) > em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb > em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe > em28xx device_mode=1" > em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2 > > And now even analog tv isn't working anymore. Al the output i get from > mplayer is a green window and a list of > v4l2: select timeout ??% ??,?% 0 0 > errors. > > Can somebody please help me? >
please reinstall the driver and submit the output of your installation, it seems like that udev didn't start the userspace daemon. The installation scripts are moreover optimized for Debian/Xandros/Redhat Markus _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
