Thanks, almost there! That did it, but now I'm having problems creating /dev/dvb/*.
No device shows up, I tried selecting the modules and doing 'make all', now I load em28xx (also with modprobe em28xx device_mode=1) and em2880-dvb with kernel automatic mods loading and get this: em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (eb1a:2870): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx: you're using the experimental/unstable tree from mcentral.de em28xx: there's also a stable tree available but which is limited to em28xx: linux <=2.6.19.2 em28xx: it's fine to use this driver but keep in mind that it will move em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's em28xx: proved to be stable em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 input: em2880/em2870 remote control as /devices/virtual/input/input11 em28xx-input.c: remote control handler attached attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00 em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 e0 b1 3b 49 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= eb1a:2870 No audio on board. 500mA max power Table at 0x04, strings=0x226a, 0x0000, 0x0000 em28xx #0: Found Pinnacle PCTV DVB-T usbcore: registered new interface driver em28xx em2880-dvb.c: DVB Init DVB: Unable to find symbol zl10353_attach() em2880-dvb.c: failed initializing zl10353 DVB-T demodulator em2880-dvb.c: retrying with mt352 DVB-T demodulator DVB: Unable to find symbol mt352_attach() em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1" Em28xx: Initialized (Em2880 DVB Extension) extension Markus Rechberger a écrit : > On 3/27/08, Elliot Orwells <[EMAIL PROTECTED]> wrote: > >> Thank you, I didn't have i2c. >> >> Just compiled it but still no em28xx, anything else that can be missing? >> >> > > you might need to run make distclean before building the repository again. > > Markus > > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
