Hi, I have the "Hybrid-Stick HVR 900 - B2C0" device and followed this instruction, to install the stick : http://konstantin.filtschew.de/blog/2006/11/30/howto-hauppauge-hvr-900-dvb-t-tuner-unter-linux-nutzen-2/
All seems to be fine, but i can't get any signal. Here some outputs: dmesg Code: em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (2040:6502): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx: you're using the experimental/unstable tree from mcentral.de em28xx: there's also a stable tree available but which is limited to em28xx: linux <=2.6.19.2 em28xx: it's fine to use this driver but keep in mind that it will move em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's em28xx: proved to be stable em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 .... em28xx #0: i2c eeprom f0: 1f f0 74 02 01 00 01 79 5f 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 2040:6502 AC97 audio (5 sample rates) 500mA max power Table at 0x24, strings=0x1e82, 0x186a, 0x0000 tveeprom 0-0050: Hauppauge model 65018, rev B2C0, serial# 2070070 tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type 71) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) tveeprom 0-0050: audio processor is None (idx 0) tveeprom 0-0050: has radio em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 em28xx #0: Found Hauppauge WinTV HVR 900 usbcore: registered new interface driver em28xx em28xx_v4l2_read 13 em28xx_v4l2_read 13 lsusb Code: Bus 001 Device 004: ID 05ca:1836 Ricoh Co., Ltd Bus 001 Device 002: ID 2040:6502 Hauppauge Bus 001 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 062a:0000 Creative Labs Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 lsmod Code: Module Size Used by em28xx 86708 0 dvb_core 69032 0 xc3028_tuner 11776 0 tun 11520 1 sonypi 20504 0 nvidia 7809920 26 compat_ioctl32 5120 1 em28xx ir_common 37380 1 em28xx videodev 28032 1 em28xx v4l2_common 18560 2 em28xx,videodev v4l1_compat 16388 2 em28xx,videodev tveeprom 17424 1 em28xx i2c_core 21888 3 em28xx,xc3028_tuner,tveeprom ipw3945 92448 0 ieee80211 30792 1 ipw3945 ieee80211_crypt 8448 1 ieee80211 iwl3945 148596 0 snd_hda_intel 256668 1 sony_laptop 31196 0 xawtv -hwscan Code: This is xawtv-3.95, running on Linux/i686 (2.6.23-gentoo-r8) looking for available devices /dev/video0: OK [ -device /dev/video0 ] type : v4l2 name : Hauppauge WinTV HVR 900 flags: capture tuner scantv -C /dev/vbi0 Code: please select your TV norm 0: PAL-BG 1: PAL-DK 2: PAL-I 3: NTSC 4: SECAM L 5: SECAM LC 6: SECAM K1 7: PAL-M nr ? 0 please select a frequency table 0: us-bcast 1: us-cable 2: us-cable-hrc 3: japan-bcast 4: japan-cable 5: europe-west 6: europe-east 7: italy 8: newzealand 9: australia 10: ireland 11: france 12: china-bcast 13: southafrica 14: argentina 15: australia-optus 16: russia nr ? 5 [global] freqtab = europe-west [defaults] input = Television norm = PAL-BG scanning channel list europe-west... E2 ( 48.25 MHz): no station E3 ( 55.25 MHz): no station .... 69 (855.25 MHz): no station xawtv -c /dev/video0 -vbidev /dev/vbi0 - can zap, but get no signal and on every zap a timeout message - have to abort with strg+c Code: xawtv -c /dev/video0 -vbidev /dev/vbi0 This is xawtv-3.95, running on Linux/i686 (2.6.23-gentoo-r8) WARNING: v4l-conf is compiled without DGA support. /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct v4l2: oops: select timeout v4l2: oops: select timeout tvtime -d /dev/video0 - tvtime is only a black window, here strg+c too, to abort Code: Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/f.kasmis/.tvtime/tvtime.xml The device works under Windows XP fine. I tried a lot of programs, like mythtv, kaffeine etc an no luck. My System: Gentoo ( 2.6.23 ), no selections in the kernel of video,dvb etc, to compile the driver successfull. It seems, that the card ist correctly installed, but i don't get any channel/signal. Any ideas ? _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
