Hello, I just installed em28xx userspace driver but the card still not works. I get "Invalid section length or timeout" when scanning channel with kaffeine and my kernel log is full of:
FIXME:em28xx_i2c_send_bytes(1e): write failed: =============================== 50 0b Could you tell me what's wrong ? Please note, that I'm french, so maybe there's an issue with PAL/SECAM modes. Thanks in advance, Regards, Adam. dmesg: usb 5-7: new high speed USB device using ehci_hcd and address 4 usb 5-7: configuration #1 chosen from 1 choice em28xx new video device (0ccd:005e): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 input: em2880/em2870 remote control as /class/input/input9 em28xx-input.c: remote control handler attached moduleid: 1 attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00 em28xx #0: i2c eeprom f0: 33 00 38 00 37 00 31 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 0ccd:005e AC97 audio (5 sample rates) 500mA max power Table at 0x27, strings=0x409e, 0x1cde, 0x346a tuner 2-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 attach_inform: tvp5150 detected. em28xx: registered module_id 1 requesting to change mode requesting to change mode em28xx #0: V4L2 VBI device registered as /dev/vbi1 em28xx #0: V4L2 device registered as /dev/video1 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em2880-dvb.c: DVB Init requesting to change mode switching to digital TV /root/em28xx-userspace2/em2880-dvb.c em2880_dvb_init 865 requesting to change mode requesting to change mode trying to attach clientid: 1 trying to reattach tuner! em2880_zl10353_init! DVB: registering new adapter (em2880 DVB-T) DVB: registering frontend 0 ((userspace) Zarlink zl10353 DVB-T)... em28xx #0: Found Terratec Hybrid XS (em2882) _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
