Am Donnerstag, 19. Juni 2008 schrieben Sie: > what does dmesg show up? try to move your antenna, it looks like > signal problems to me. > > Markus
Hi, this is dmesg output: Linux baumbart 2.6.25-gentoo-r3 #5 PREEMPT Sat May 17 22:32:37 CEST 2008 i686 Intel(R) Pentium(R) M processor 1.60GHz GenuineIntel GNU/Linux [ 190.767801] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 190.894096] usb 1-2: configuration #1 chosen from 1 choice [ 191.238147] Linux video capture interface: v2.00 [ 191.290051] em28xx v4l2 driver version 0.0.1 loaded [ 191.290091] em28xx new video device (eb1a:2870): interface 0, class 255 [ 191.290097] em28xx: device is attached to a USB 2.0 bus [ 191.290103] em28xx: you're using the experimental/unstable tree from mcentral.de [ 191.290109] em28xx: there's also a stable tree available but which is limited to [ 191.290115] em28xx: linux <=2.6.19.2 [ 191.290120] em28xx: it's fine to use this driver but keep in mind that it will move [ 191.290126] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's [ 191.290132] em28xx: proved to be stable [ 191.290139] em28xx #0: Alternate settings: 8 [ 191.290145] em28xx #0: Alternate setting 0, max size= 0 [ 191.290151] em28xx #0: Alternate setting 1, max size= 0 [ 191.290157] em28xx #0: Alternate setting 2, max size= 1448 [ 191.290163] em28xx #0: Alternate setting 3, max size= 2048 [ 191.290169] em28xx #0: Alternate setting 4, max size= 2304 [ 191.290175] em28xx #0: Alternate setting 5, max size= 2580 [ 191.290181] em28xx #0: Alternate setting 6, max size= 2892 [ 191.290187] em28xx #0: Alternate setting 7, max size= 3072 [ 191.564077] input: em2880/em2870 remote control as /class/input/input8 [ 191.564701] em28xx-input.c: remote control handler attached [ 191.567524] attach_inform: eeprom detected. [ 191.629388] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00 [ 191.629388] em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00 [ 191.629388] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00 [ 191.629388] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 66 11 e7 49 [ 191.629388] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629388] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629388] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 191.629388] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 [ 191.629388] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 191.629388] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629388] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629388] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629389] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629389] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629389] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629389] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 191.629389] EEPROM ID= 0x9567eb1a [ 191.629389] Vendor/Product ID= eb1a:2870 [ 191.629389] No audio on board. [ 191.629389] 500mA max power [ 191.629389] Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 191.632401] em28xx #0: Found Pinnacle PCTV DVB-T [ 191.632441] usbcore: registered new interface driver em28xx [ 191.714849] tuner 1-0060: Chip ID is not zero. It is not a TEA5767 [ 191.714853] tuner 1-0060: chip found @ 0xc0 (em28xx #0) [ 191.714888] attach inform (default): detected I2C address c0 [ 191.714893] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback [ 191.714895] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback [ 191.774007] em2880-dvb.c: DVB Init [ 191.775960] MT2060: successfully identified (IF1 = 1220) [ 192.235402] DVB: registering new adapter (em2880 DVB-T) [ 192.235402] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... [ 192.235402] Em28xx: Initialized (Em2880 DVB Extension) extension I can move my antenna wherever i want, stays the same, i can go outdoor and it wont get better. Any other hints or things i can do? thx Torsten
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
