Hi, On Sun, Jun 22, 2008 at 6:30 PM, "Adam Cécile (Le_Vert)" <[EMAIL PROTECTED]> wrote: > Hello, > > I just gave a try again (some monthes later) and the card still doesn't > work. > I grabbed latest mercurial sources from > http://mcentral.de/hg/~mrec/em28xx-new. >
I recently pushed almost 100 patches (especially properly adding VBI/zvbi/videotext support), I think I have that device too I'll check it when I'm home again. Markus > Here is the card: > [EMAIL PROTECTED]:~$ sudo lsusb > Bus 005 Device 003: ID 0ccd:005e TerraTec Electronic GmbH > > My kernel: > [EMAIL PROTECTED]:~$ uname -a > Linux hellscream 2.6.25-2-amd64 #1 SMP Thu Jun 12 15:38:32 UTC 2008 x86_64 > GNU/Linux > > What happens when I plug the stick: > [ 390.996938] input: em2880/em2870 remote control as /class/input/input8 > [ 391.041185] em28xx-input.c: remote control handler attached > [ 391.242822] trying to set disabled gpio? (00) > [ 391.244469] attach_inform: eeprom detected. > [ 391.281572] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 > 9e 40 de 1c > [ 391.281600] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 > 00 00 00 00 > [ 391.281662] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 > 5b 1e 00 00 > [ 391.281723] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 > 00 00 00 00 > [ 391.281784] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 391.281844] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 391.281906] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 > 54 00 65 00 > [ 391.281966] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 > 20 00 45 00 > [ 391.282026] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 > 6e 00 69 00 > [ 391.282086] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 > 00 00 40 03 > [ 391.282146] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 > 79 00 20 00 > [ 391.282208] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 > 20 00 54 00 > [ 391.282268] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 > 53 00 20 00 > [ 391.282327] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 > 00 00 1c 03 > [ 391.282387] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 > 30 00 30 00 > [ 391.282448] em28xx #0: i2c eeprom f0: 33 00 38 00 37 00 31 00 00 00 00 00 > 00 00 00 00 > [ 391.282509] EEPROM ID= 0x9567eb1a > [ 391.282515] Vendor/Product ID= 0ccd:005e > [ 391.282519] AC97 audio (5 sample rates) > [ 391.282524] 500mA max power > [ 391.282529] Table at 0x27, strings=0x409e, 0x1cde, 0x346a > [ 391.285523] tuner' 5-0061: chip found @ 0xc2 (em28xx #0) > [ 391.285556] attach inform (default): detected I2C address c2 > [ 391.292895] attach_inform: tvp5150 detected. > [ 391.360544] tvp5150 5-005c: tvp5150am1 detected. > [ 392.954708] successfully attached tuner > [ 392.960390] em28xx #0: V4L2 VBI device registered as /dev/vbi1 > [ 381.230929] analog tv open() > [ 381.230937] modelock active! > [ 392.966635] vbi open() > [ 392.966645] modelock active! > [ 392.982489] em28xx #0: V4L2 device registered as /dev/video1 > [ 392.982489] em28xx-audio.c: probing for em28x1 non standard usbaudio > [ 392.982489] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > [ 392.982489] em2880-dvb.c: DVB Init > [ 381.584728] DVB: registering new adapter (em2880 DVB-T) > [ 381.584736] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > [ 381.585030] em28xx #0: Found Terratec Hybrid XS (em2882) > [ 381.585188] usb 5-4: New USB device found, idVendor=0ccd, idProduct=005e > [ 381.585191] usb 5-4: New USB device strings: Mfr=3, Product=1, > SerialNumber=2 > [ 381.585193] usb 5-4: Product: Cinergy Hybrid T USB XS (2882) > [ 381.585195] usb 5-4: Manufacturer: TerraTec Electronic GmbH > [ 381.585197] usb 5-4: SerialNumber: 070802003871 > > Scanning channels with kaffeine: > > [EMAIL PROTECTED]:~$ kaffeine > /dev/dvb/adapter0/frontend0 : opened ( Zarlink ZL10353 DVB-T ) > 0 EPG plugins loaded for device 0:0. > Loaded epg data : 0 events (0 msecs) > [EMAIL PROTECTED]:~$ DvbCam::probe(): /dev/dvb/adapter0/ca0: : Aucun > fichier ou répertoire de ce type > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > tuning DVB-T to 401833000 Hz > inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4 > ............... > > Not able to lock to the signal on the given frequency > Frontend closed > dvbsi: Cant tune DVB > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > tuning DVB-T to 402000000 Hz > inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4 > ............... > > Not able to lock to the signal on the given frequency > Frontend closed > dvbsi: Cant tune DVB > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > tuning DVB-T to 402167000 Hz > inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4 > ............... > > Not able to lock to the signal on the given frequency > Frontend closed > dvbsi: Cant tune DVB > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > tuning DVB-T to 409833000 Hz > inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4 > ............... > > Not able to lock to the signal on the given frequency > Frontend closed > dvbsi: Cant tune DVB > Saved epg data : 0 events (0 msecs) > > > Is there anything I can do to get this card working ? > I bought it nearly one year ago and it seems to still not be supported :( > > Regards, Adam. > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
