On Wed, Jul 23, 2008 at 9:16 PM, FLoh Leeber <[EMAIL PROTECTED]> wrote: > Hi folks, > > after about 4 hours playing around with this, I finally think that I should > professional help :-) > > Compiling and installing went fine - except that the xc5000 driver doesn?t > compile because of a "paravirt_ops not declared" in xc5000_co ntrol.c line > 118... but if I exclude this from build, the rest seems fine.
what kernel/system do you use? paravirt_ops is not used with the driver, could be some extra requirement of your kernel. Markus > Now, loading seems also fine except the thing that no firmware gets loaded. > It looks like this: > > [ 668.620000] em28xx v4l2 driver version 0.0.1 loaded > [ 668.672000] em28xx new video device (2304:0226): interface 0, class 255 > [ 668.672000] em28xx: device is attached to a USB 2.0 bus > [ 668.672000] em28xx #0: Alternate settings: 8 > [ 668.672000] em28xx #0: Alternate setting 0, max size= 0 > [ 668.672000] em28xx #0: Alternate setting 1, max size= 0 > [ 668.672000] em28xx #0: Alternate setting 2, max size= 1448 > [ 668.672000] em28xx #0: Alternate setting 3, max size= 2048 > [ 668.672000] em28xx #0: Alternate setting 4, max size= 2304 > [ 668.672000] em28xx #0: Alternate setting 5, max size= 2580 > [ 668.672000] em28xx #0: Alternate setting 6, max size= 2892 > [ 668.672000] em28xx #0: Alternate setting 7, max size= 3072 > [ 669.296000] attach_inform: eeprom detected. > [ 669.324000] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 > 8e 16 a4 1c > [ 669.324000] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 > 5b e0 00 00 > [ 669.324000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 > 50 00 69 00 > [ 669.324000] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 > 20 00 53 00 > [ 669.324000] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 > 00 00 16 03 > [ 669.324000] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 > 33 00 30 00 > [ 669.324000] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 > 30 00 30 00 > [ 669.324000] em28xx #0: i2c eeprom b0: 31 00 30 00 31 00 30 00 33 00 35 00 > 33 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 669.324000] EEPROM ID= 0x9567eb1a > [ 669.324000] Vendor/Product ID= 2304:0226 > [ 669.324000] AC97 audio (5 sample rates) > [ 669.324000] 500mA max power > [ 669.324000] Table at 0x27, strings = 0x168e, 0x1ca4, 0x246a > [ 669.340000] tuner 4-0061: chip found @ 0xc2 (em28xx #0) > [ 669.344000] em28xx-i2c: using internal tuner, denying request to i2c tuner > module. > [ 669.356000] attach_inform: tvp5150 detected. > [ 669.420000] tvp5150 4-005c: tvp5150am1 detected. > [ 669.652000] unable to attach tuner <=========================== ??? > [ 669.660000] em28xx #0: V4L2 VBI device registered as /dev/vbi1 > [ 669.716000] em28xx #0: V4L2 device registered as /dev/video1 > [ 669.732000] input: em2880/em2870 remote control as /class/input/input7 > [ 669.732000] em28xx-input.c: remote control handler attached > [ 669.732000] em28xx #0: Found Pinnacle Hybrid Pro (em2882) > [ 669.736000] usbcore: registered new interface driver em28xx > [ 669.856000] em28xx-audio.c: probing for em28x1 non standard usbaudio > [ 669.856000] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > [ 669.856000] Em28xx: Initialized (Em28xx Audio Extension) extension > [ 669.920000] em2880-dvb.c: DVB Init > [ 671.624000] DVB: registering new adapter (em2880 DVB-T). > [ 671.624000] DVB: registering frontend 0 (Micronas DRX3973D DVB-T)... > [ 671.624000] Em28xx: Initialized (Em2880 DVB Extension) extension > > then there is this unable to attach tuner - should I care for this? Which > part is barking there? > And finally, I only need DVB support for the moment, shouldn?t that work > without the tuner stuff listed? > > Anyhow, no channel can be tuned - regardless of the used software. > > any ideas? > > > kind regards, F. Leeber > > > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
