Hi, On Sun, Jul 27, 2008 at 10:24 PM, Jelle de Jong <[EMAIL PROTECTED]> wrote: > Markus Rechberger wrote: >> >> Hi Jelle, >> >> On Sun, Jul 27, 2008 at 8:36 PM, Jelle de Jong >> <[EMAIL PROTECTED]> wrote: >>> >>> Hi Markus, >>> >>> My dvb-t is not picking up any signals anymore, I am standing outside at >>> a >>> place with normally full receptions. It does not work sins the last >>> checkout >>> that I did last week? >>> >>> em28xx #0: Found Hauppauge WinTV HVR (B2C0) >>> usb 5-3: New USB device found, idVendor=2040, idProduct=6502 >>> usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 >>> usb 5-3: Product: WinTV HVR-900 >>> usb 5-3: SerialNumber: 4030600678 >>> >>> ps my other Terratec Cinergy Hybrid T USB XS is not working with analog >>> there is only video without audio and dvb-t is not tested. >>> >>> Any idea's? >>> >> >> how old is the driver which you installed? >> Try to upgrade to the latest one! >> >> Markus > > point 1: > build and install was successful, thanks for the fast fix in the repository! > > point 2: > i always get a non standard LSB Linux kernel module message, when udev > is loading all the device kernel modules during boot: > em28xx new video device (2040:6502): interface 0, class 255 > Is it possible to put this message in the dmesg buffer only, and not > include it in the main tty output? This would make my boot process a bit > cleaner.
this already comes through "dmesg" the kernel debug output. > > point 3: > the Hauppauge WinTV HVR is finding it's dvb-t channels again, this may > have been a pebkac, i am not sure, sorry in advance :-p > free to air dvb-t audio and video are working sufficient with > totem-xine: totem-xine --no-existing-session dvb: > fine. > point 4: > Hauppauge WinTV HVR > with your patched tvtime the audio and video are working also sufficient. > > - rebooting with new device > > point 5: > same messages with point 2 with the new device > em28xx new video device (0ccd:0042): interface 0, class 255 > > em28xx #0: Found Terratec Hybrid XS > em28xx audio device (0ccd:0042): interface 1, class 1 > em28xx audio device (0ccd:0042): interface 2, class 1 > em2880-dvb.c: DVB Init > em2880-dvb.c: failed initializing zl10353DVB-T demodulator > em2880-dvb.c: retrying with mt352 DVB-Tdemodulator > em2880-dvb.c: no luck with mt352demodulator, not attaching em2880-dvb > the device initialization needs to be redone in order to fix that correctly. This is something difficult since all devices need to be tested again. > no fronted is created dvb-t not functional yet > > point 6: > Terratec Hybrid XS > tvp5150 1-005c: tvp5150am1 detected. > with the patched tvtime video is working, but there is no audio > yes, tvtime is very likely not patched to support that device yet, I'll add a patch later for this, unless someone else submits a patch for it first. http://mcentral.de/cgi-bin/mailman/listinfo/em28xx-commits em28xx-commits is available if you want to get mails when something got updated. thanks for pointing out to those issues, Markus > So far some status updates on some testing, > > h > > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
