Markus Rechberger wrote: > Hi, > > On Thu, Aug 14, 2008 at 7:35 PM, Michael Murphy <[EMAIL PROTECTED]> wrote: >> Hello, Markus. >> >> I have the HVR-950 which I have used successfully with kubuntu/gutsy. >> >> I've upgraded to hardy and have installed the package located at: >> http://mcentral.de/empia/20080804/empia-hardy-generic-i386-latest.deb >> >> Upon plugging in the device, I was able to receive video but not audio; >> no /dev/dsp device had been created. I assumed that that would be the >> job of em28xx-audio.ko and an lsmod confirmed that it was not loaded. >> When I modprobe'd the driver, I got the message: >> >> $ sudo modprobe em28xx-audio >> FATAL: Error inserting em28xx_audio >> (/lib/modules/2.6.24-19-generic/empia/em28xx-audio.ko): Unknown symbol >> in module, or unknown parameter (see dmesg) >> >> dmesg showed: >> em28xx_audio: Unknown parameter `index' >> > > you might check /etc/modprobe.d/options if em28xx-audio is in there if > so, just completly remove that entry because it's wrong. > > If you can't find it there run grep em28xx-audio * -r in /etc and look > if there's a file which has index=somevalue next to em28xx-audio.
Your suggested command pointed me to the file in error and I was able to correct it. The module now loads and sound is working. Thanks for all you do, Michael > > there's no such index parameter available for em28xx-audio. > > regards, > Markus > >> I'd be very grateful for any guidance you might provide. >> >> -- >> Michael >> >> > _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
