On Mon, Aug 18, 2008 at 12:08:14PM +0200, Miroslav Pragl wrote: > Please make sure you have /lib/modules/<yourkernelversion>/build linked > to kernel you just prepared! > > MP
Hi, I've solved the problem using a kernel from kernel.org now I'm running 2.6.26.2 version and em28xx-new compile just fine. Now I can see DVB-T and analog TV very well, thank you again for the great work! Next step will be IR setup, in case you need it, that's my dmesg: hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 ehci_hcd 0000:00:03.3: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:03.3: port 4 high speed ehci_hcd 0000:00:03.3: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT usb 1-4: new high speed USB device using ehci_hcd and address 4 ehci_hcd 0000:00:03.3: port 4 high speed ehci_hcd 0000:00:03.3: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT usb 1-4: default language 0x0409 usb 1-4: uevent usb 1-4: usb_probe_device usb 1-4: configuration #1 chosen from 1 choice usb 1-4: adding 1-4:1.0 (config #1, interface 0) usb 1-4:1.0: uevent drivers/usb/core/inode.c: creating file '004' usb 1-4: New USB device found, idVendor=2040, idProduct=6502 usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 usb 1-4: Product: WinTV HVR-900 usb 1-4: SerialNumber: 4028523360 Linux video capture interface: v2.00 em28xx v4l2 driver version 0.0.1 loaded em28xx 1-4:1.0: usb_probe_interface em28xx 1-4:1.0: usb_probe_interface - got id em28xx: new video device (2040:6502): interface 0, class 255 em28xx: device is attached to a USB 2.0 bus em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 attach_inform: tvp5150 detected. tvp5150 1-005c: tvp5150am1 detected. successfully attached tuner em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 input: em2880/em2870 remote control as /class/input/input8 em28xx-input.c: remote control handler attached em28xx #0: Found Hauppauge WinTV HVR (B2C0) usbcore: registered new interface driver em28xx em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger Em28xx: Initialized (Em28xx Audio Extension) extension tvp5150 1-005c: tvp5150am1 detected. best regards, -- Fabio Venturi _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
