On Fri, Aug 22, 2008 at 10:27 PM, Mikael Djurfeldt <[EMAIL PROTECTED]> wrote: > I'm trying to get the em2820 equipped TV-57 (Grabbeex+ deluxe) to work > under Linux. > > At first, giving the em28xx-new driver the option card=# where # > indicated Pinnacle DVC 90 or some similar card, seemed to work. > However, after playing back video using mplayer for a while, the > screen flickers, and after a little while longer, it turns green, > Syslog then contains the following: > > Aug 22 22:07:59 kvast kernel: [ 8195.322383] em28xx #0: resubmit of > urb failed (error=-45) > Aug 22 22:07:59 kvast kernel: [ 8195.542914] em28xx #0: v4l2 ioctl: > device is misconfigured; close and open it again > > Any ideas of what could be wrong? >
seriously this seems to be a hardware problem. please try to verify the connection between the device and your usb controller. I had and have those issues when I connect devices to a lousy connected (due broken soldered connnectors on the motherboard) port on my notebook. Markus > Best regards, > M > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
