2008/9/8 Andrei Rjeousski <[EMAIL PROTECTED]>: > > > On Sun, Aug 31, 2008 at 8:33 PM, Markus Rechberger <[EMAIL PROTECTED]> > wrote: >> >> 2008/8/13 Andrei Rjeousski <[EMAIL PROTECTED]>: >> > Hi Marcus, >> > >> > I've tried to upgrade to the latest em28xx-new version and found that >> > scanning and tuning is broken. I've then tracked it down to the >> > following >> > change that breaks scanning. >> > http://mcentral.de/hg/~mrec/em28xx-new/rev/24208f4a8fe0 >> > This version works correctly: >> > http://mcentral.de/hg/~mrec/em28xx-new/rev/91926ab5b805 >> > >> >> I'm rechecking this again, sorry for the inconvenience (especially for >> the delay). >> >> the null PTR issue got solved already, the rest will be tested again >> right tomorrow. >> >> -Markus >> >> > Dmesg Below: >> > >> > Linux video capture interface: v2.00 >> > em28xx v4l2 driver version 0.0.1 loaded >> > em28xx new video device (2040:6513): interface 0, class 255 >> > em28xx: device is attached to a USB 2.0 bus >> > em28xx #0: Alternate settings: 8 >> > em28xx #0: Alternate setting 0, max size= 0 >> > em28xx #0: Alternate setting 1, max size= 0 >> > em28xx #0: Alternate setting 2, max size= 1448 >> > em28xx #0: Alternate setting 3, max size= 2048 >> > em28xx #0: Alternate setting 4, max size= 2304 >> > em28xx #0: Alternate setting 5, max size= 2580 >> > em28xx #0: Alternate setting 6, max size= 2892 >> > em28xx #0: Alternate setting 7, max size= 3072 >> > attach_inform: tvp5150 detected. >> > tvp5150 2-005c: tvp5150am1 detected. >> > successfully attached tuner >> > em28xx #0: V4L2 VBI device registered as /dev/vbi0 >> > em28xx #0: V4L2 device registered as /dev/video0 >> > em28xx #0: Found Hauppauge WinTV HVR 950 >> > usbcore: registered new interface driver em28xx >> > em28xx-audio.c: probing for em28x1 non standard usbaudio >> > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger >> > Em28xx: Initialized (Em28xx Audio Extension) extension >> > em2880-dvb.c: DVB Init >> > DVB: registering new adapter (em2880 DVB-T) >> > DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM >> > Frontend)... >> > Em28xx: Initialized (Em2880 DVB Extension) extension >> > switching over from 3 >> > resetting demod >> > em28xx_dvb_init >> > NULL PTR >> > >> > Let me know if you need any more information... >> > -- >> > Andrei Rjeousski >> > >> > _______________________________________________ >> > Em28xx mailing list >> > [email protected] >> > http://mcentral.de/mailman/listinfo/em28xx >> > >> > > > Thanks Markus, > I've tested the latest version again and everything is working correctly. > Thanks! >
it more or less was the firmware upgrade, we had signal drops and customers complaining about a weaker signal in linux. It wouldn't have been necessary for most devices, just for newer ones which seem to require less power. Although now it's running with the latest code from Xceive. Markus _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
