-----Original Message----- From: Markus Rechberger [mailto:[EMAIL PROTECTED] Sent: Thursday, September 11, 2008 10:28 PM To: KH Chai Cc: [email protected] Subject: Re: [Em28xx] KWorld 310U lircd.conf
On Thu, Sep 11, 2008 at 12:15 PM, KH Chai <[EMAIL PROTECTED]> wrote: > Anyone has lircd.conf and lircrc file for KWorld 310U. > Greatly appreciated if you could share it. > did you get the remote work? the numbers should work without any lircrc file. Markus Hi Markus, The system detected the remote control, but none of the button works. I tried lineakd, but that didn't work out either. I'm trying to install lirc at this time and in searching for the lircd.conf Or is there a better way to get the remote control to work. This is the output of dmesg | grep em28 The remote control is attached to /devices/virtual/input/input7 [ 37.920915] em28xx v4l2 driver version 0.0.1 loaded [ 37.932896] em28xx: new video device (eb1a:e310): interface 0, class 255 [ 37.932904] em28xx: device is attached to a USB 2.0 bus [ 37.932915] em28xx #0: Alternate settings: 8 [ 37.932920] em28xx #0: Alternate setting 0, max size= 0 [ 37.932926] em28xx #0: Alternate setting 1, max size= 0 [ 37.932931] em28xx #0: Alternate setting 2, max size= 1448 [ 37.932937] em28xx #0: Alternate setting 3, max size= 2048 [ 37.932943] em28xx #0: Alternate setting 4, max size= 2304 [ 37.932949] em28xx #0: Alternate setting 5, max size= 2580 [ 37.932955] em28xx #0: Alternate setting 6, max size= 2892 [ 37.932961] em28xx #0: Alternate setting 7, max size= 3072 [ 40.067208] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 40.083086] em28xx #0: V4L2 device registered as /dev/video0 [ 40.083243] input: em2880/em2870 remote control as /devices/virtual/input/input7 [ 40.106000] em28xx-input.c: remote control handler attached [ 40.106010] em28xx #0: Found MSI DigiVox A/D [ 40.106168] usbcore: registered new interface driver em28xx [ 40.350541] em2880-dvb.c: DVB Init [ 40.764854] DVB: registering new adapter (em2880 DVB-T) Below might be more suitable for a new topic but might be somewhat related. After a clean installation of em28xx-new and xc3028-v27.fw, I use kaffeine to play the DVB-T channel. It works great, except for the remote control :( However, when I try to play DVB-T on mythtv, the backend crashes. I then try to use kaffeine again, but it couldn't detect the tuner. I did a reboot, but no luck of getting the tuner back, so I reinstall mythbuntu. I think mythtv is using mplayer. I don't know if this is the em28xx-new driver issue or the mythtv configuration issue. Any idea about his issue? Regards, KH _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
