Markus Rechberger írta:
> On Thu, Nov 20, 2008 at 12:40 AM, Németh Márton <[EMAIL PROTECTED]> wrote:
>> Markus Rechberger írta:
>>> Hi,
>>>
>>> 2008/11/19 Németh Márton <[EMAIL PROTECTED]>:
>>>> Hi,
>>>>
>>>> I have the some problems when I want to watch analog broadcast channels
>>>> on Pinnacle Hybrid Pro Stick (320e) USB ID=eb1a:2881.
>>>>
>>>> Steps to reproduce:
>>>> 1. Boot computer
>>>> 2. Plug in Pinnacle Hybrid Pro Stick (320e)
>>>> 3. Start "rawrec -c 1 -f s16_le -s 44100 -d /dev/dsp2 |rawplay -c 1 -f
>>>> s16_le -s 44100 -d /dev/dsp" as root
>>>> 4. Start "xawtv" => there is no sound
>>> run rawrec after xawtv is started?
>> The result is the same: no sound.
>> Change "Video source" from "Television" to "Composite1" => no sound, black
>> video.
>> Change "Video source" from "Composite1" to "Television" again => video OK
>> and sound is available (but noisy).
>>
>> If I exit xawtv now and start it again I do not need to change
>> the "Video source" and I can hear the sound.
>
> I will check this tomorrow!
Additional info: when the device is first plugged in, there is no sound with
xawtv. Then I open the "Video source" and select again "Television", then
the sound starts.
Then I stop xawtv, start it again: there is sound.
Then I stop xawtv again, unplug the device, replug it: there is no sound
in xawtv until I set the "Video source" again explicitly.
Regards,
Márton Németh
>>>> 5. Right click on xawtv to show the menu window
>>>> 6. Modify "Video source" from "Television" to "Composite1"
>>>> 7. Modify "Video source" back from "Composite1" to "Television"
>>>>
>>>> now I can hear the sound (altrough it is a robot-like sound, which can be
>>>> understanded but it is not clear). I am using Linux kernel 2.6.27.5.
>>>>
>>>> Any idea how to fix the sound?
>>>>
>>>> Regards,
>>>>
>>>> Márton Németh
>
>
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
