Oops, my bad, double grep makes for a double error :S Yes, the entry is not duplicated in the full dmesg.
Julio On Fri, 2009-01-09 at 19:33 +0100, Markus Rechberger wrote: > On Fri, Jan 9, 2009 at 7:20 PM, Julio Meca Hansen > <lydiankni...@gmail.com> wrote: > > This is my new dmesg output (dmesg | grep em28 && dmesg | grep DVB): > > > > em28xx v4l2 driver version 0.0.1 loaded > > em28xx: new video device (0ccd:005e): interface 0, class 255 > > em28xx: device is attached to a USB 2.0 bus > > em28xx #0: Alternate settings: 8 > > em28xx #0: Alternate setting 0, max size= 0 > > em28xx #0: Alternate setting 1, max size= 0 > > em28xx #0: Alternate setting 2, max size= 1448 > > em28xx #0: Alternate setting 3, max size= 2048 > > em28xx #0: Alternate setting 4, max size= 2304 > > em28xx #0: Alternate setting 5, max size= 2580 > > em28xx #0: Alternate setting 6, max size= 2892 > > em28xx #0: Alternate setting 7, max size= 3072 > > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > > em28xx #0: V4L2 device registered as /dev/video1 > > input: em2880/em2870 remote control as /class/input/input9 > > em28xx-input.c: remote control handler attached > > em28xx #0: Found Empia Hybrid ATSC (em2882) > > usbcore: registered new interface driver em28xx > > em28xx-audio.c: probing for em28x1 non standard usbaudio > > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > > ---- > > em2880-dvb.c: DVB Init > > DVB: registering new adapter (em2880 DVB-T) > > em2880-dvb.c: DVB Init > > DVB: registering new adapter (em2880 DVB-T) > > guess this was a copy/paste error? > > Markus > > > DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... > > Em28xx: Initialized (Em2880 DVB Extension) extension > > > > Julio > > > > On Fri, 2009-01-09 at 18:16 +0100, Markus Rechberger wrote: > >> On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen > >> <lydiankni...@gmail.com> wrote: > >> > Thanks Valerio and Markus, > >> > > >> > That's exactly what I did per Valerio's suggestion and it worked, > >> > now I'm facing the problem of not being able to tune any digital station > >> > even > >> > if I have extracted the es-Malaga (the city where I live in Spain) and > >> > run > >> > the > >> > scan program over it, but well... it's just another little step, other > >> > than > >> > that, > >> > the analog inputs are working really great (tested so far with zapping). > >> > > >> > >> what does dmesg show up? > >> > >> Markus > >> > >> > Thanks a lot :D > >> > > >> > Julio > >> > > >> > -------------------------------------------------- > >> > From: "Markus Rechberger" <mrechber...@gmail.com> > >> > Sent: Friday, January 09, 2009 3:13 PM > >> > To: "Julio Meca Hansen" <lydiankni...@gmail.com> > >> > Cc: <em28xx@mcentral.de> > >> > Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect > >> > XC3028 > >> > firmware? > >> > > >> >> On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen > >> >> <lydiankni...@gmail.com> wrote: > >> >>> > >> >>> Hi, > >> >>> > >> >>> I'm trying to support this device under my Linux distro (LFS based, so > >> >>> custom made from sources) and I'm bit stucked. > >> >>> > >> >>> I have downloaded firmware_v2.tgz and included support for this device > >> >>> in the kernel, but it fails at the time of loading the xc3028-v27.fw > >> >>> file. > >> >>> > >> >> > >> >> just try to compile the driver from mcentral.de, it has the firmware > >> >> built in already. > >> >> > >> >> $ hg clone http://mcentral.de/hg/~mrec/em28xx-new > >> >> $ cd em28xx-new > >> >> $ make > >> >> $ make install > >> >> $ - reboot - > >> >> > >> >> if you installed the code from linuxtv.org you probably upgraded the > >> >> whole media framework > >> >> you would have to run make modules_install in the kernel sourcetree > >> >> again in order to revert > >> >> the media core, the em28xx-new repository only contains the driver and > >> >> not the whole media framework. > >> >> > >> >> regards, > >> >> Markus > >> >> > >> >>> Here is the output of dmesg: > >> >>> > >> >>> em28xx new video device (0ccd:005e): interface 0, class 255 > >> >>> em28xx Doesn't have usb audio class > >> >>> em28xx #0: Alternate settings: 8 > >> >>> em28xx #0: Alternate setting 0, max size= 0 > >> >>> em28xx #0: Alternate setting 1, max size= 0 > >> >>> em28xx #0: Alternate setting 2, max size= 1448 > >> >>> em28xx #0: Alternate setting 3, max size= 2048 > >> >>> em28xx #0: Alternate setting 4, max size= 2304 > >> >>> em28xx #0: Alternate setting 5, max size= 2580 > >> >>> em28xx #0: Alternate setting 6, max size= 2892 > >> >>> em28xx #0: Alternate setting 7, max size= 3072 > >> >>> em28xx #0: chip ID is em2882/em2883 > >> >>> Clocksource tsc unstable (delta = -62880812 ns) > >> >>> tuner' 1-0061: chip found @ 0xc2 (em28xx #0) > >> >>> em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de > >> >>> 1c > >> >>> em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 > >> >>> 03 > >> >>> em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c > >> >>> 03 > >> >>> em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 > >> >>> 00 > >> >>> em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 > >> >>> 00 > >> >>> EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe > >> >>> Vendor/Product ID= 0ccd:005e > >> >>> AC97 audio (5 sample rates) > >> >>> 500mA max power > >> >>> Table at 0x27, strings=0x409e, 0x1cde, 0x346a > >> >>> em28xx #0: > >> >>> > >> >>> em28xx #0: The support for this board weren't valid yet. > >> >>> em28xx #0: Please send a report of having this working > >> >>> em28xx #0: not to V4L mailing list (and/or to other addresses) > >> >>> > >> >>> xc2028 1-0061: creating new instance > >> >>> xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner > >> >>> i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw > >> >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: > >> >>> 0xc04751/0xe0500f > >> >>> input: SynPS/2 Synaptics TouchPad as /class/input/input5 > >> >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: > >> >>> 0xa04711/0xa04000 > >> >>> input: SynPS/2 Synaptics TouchPad as /class/input/input6 > >> >>> input: AT Translated Set 2 keyboard as /class/input/input7 > >> >>> xc2028 1-0061: Error: firmware xc3028-v27.fw not found. > >> >>> tvp5150 1-005c: tvp5150am1 detected. > >> >>> em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 > >> >>> em28xx-audio.c: probing for em28x1 non standard usbaudio > >> >>> em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > >> >>> em28xx #0: Found Terratec Hybrid XS (em2882) > >> >>> > >> >>> my xc3028-v27.fw file is located in /lib/firmware among the other files > >> >>> in the firmware_v2.tgz file, and I extracted it using the > >> >>> extract-xc3028.pl perl script using the Hauppauge windows driver as > >> >>> stated in > >> >>> > >> >>> http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html > >> >>> > >> >>> I'm curious because my windows driver (under windows xp 32bit) is named > >> >>> emBDA.sys, but I have tried the convert.c utility and it doesn't work, > >> >>> it produces 0 output. > >> >>> > >> >>> Is it something more I need in order to correct this last step prior to > >> >>> have my tv tuner working? > >> >>> > >> >>> Thanks in advance, > >> >>> Julio > >> >>> > >> >>> > >> >>> _______________________________________________ > >> >>> Em28xx mailing list > >> >>> Em28xx@mcentral.de > >> >>> http://mcentral.de/mailman/listinfo/em28xx > >> >>> > >> > > > > > _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
