On Tue, Oct 26, 2010 at 6:01 PM, Eric Schulte <schulte.e...@gmail.com>wrote:
> Hi,
>
> First my previously pasted :exports code will throw errors on
> interactive evaluation (i.e. when not exporting), this alternative
> should be more robust.
>
> :exports (if (and (boundp 'latexp) latexp) "code" "results")
>
> As for placing latex headers in a latex code block, I don't believe that
> is currently possible. I do agree it would be nice for latex code
> blocks to inherit latex headers from the containing Org-mode buffer but
> that would be a non-trivial piece of development, which I just don't
> have time for at the moment.
>
> I've just added a :headers argument which should allow changing things
> like fonts that need to take place in the headers portion of the latex
> file. See the following examples, passing both a single header and a
> list of headers.
>
--8<---------------cut here---------------start------------->8---
> #+begin_src latex :headers \usepackage{lmodern} :file name1.pdf
> Eric Schulte
> #+end_src
>
> #+results:
> [[file:name1.pdf]]
>
> #+begin_src latex :headers '("\\usepackage{mathpazo}"
> "\\usepackage{fullpage}") :file name2.pdf
> Eric Schulte
> #+end_src
>
> #+results:
> [[file:name2.pdf]]
> --8<---------------cut here---------------end--------------->8---
>
> Please pull this down and let me know if it works for you.
>
>
Just pulled, make clean && make && make doc && make install. Tried it and I
get the default font for the first and Palatino for the second, but the
lmodern is not appearing to change what's going on. I tried what usually
works for me:
\renewcommand{\rmdefault}{cmss}
and this did not work to make it sans serif. Am I doing something wrong?
Thanks,
John
> Best -- Eric
>
> John Hendy <jw.he...@gmail.com> writes:
>
> > Maybe it would just be easier if someone attached a .org file that
> functions
> > as you think would work well -- with both the document and the babel/TikZ
> > export having the same sans-serif font. Perhaps then I could simply C-e p
> > the document and C-c C-c the babel block myself to examine how it
> behaves?
> >
> > I was not able to get the conditional :export code provided to work.
> >
> > Thanks,
> > John
> >
> > On Tue, Oct 26, 2010 at 9:34 AM, John Hendy <jw.he...@gmail.com> wrote:
> >
> >> On Tue, Oct 26, 2010 at 3:17 AM, Eric S Fraga <ucec...@ucl.ac.uk>
> wrote:
> >>
> >>> On Mon, 25 Oct 2010 13:58:41 -0500, John Hendy <jw.he...@gmail.com>
> >>> wrote:
> >>> >
> >>> > [1 <text/plain; ISO-8859-1 (7bit)>]
> >>> >
> >>> > [2 <text/html; ISO-8859-1 (quoted-printable)>]
> >>> > On Mon, Oct 25, 2010 at 1:53 PM, Eric Schulte <
> schulte.e...@gmail.com>
> >>> wrote:
> >>> >
> >>> > Hi John,
> >>> >
> >>> > In the case you describe I would export the *code* of the tikz
> latex
> >>> > block rather than the file resulting from evaluating the block.
> >>> >
> >>> > Code = raw LaTeX/TikZ code? If so, I don't really care about that. i
> >>> just want the graphic.
> >>>
> >>> Yes but the point is that, if I understand the processes involved
> >>> correctly, the export and babel routes each generate different latex
> >>> code. Babel does *not* look at the document wide settings whereas
> >>> export does. This is why Eric is suggesting you export the babel code
> >>> so that it is interpreted by the latex document that results from
> >>> exporting the whole org document. Otherwise, make sure the settings
> >>> you want are within the latex source code block?
> >>>
> >>
> >> That makes more sense, though if I export the code into the larger LaTeX
> >> document, I'm left where I started, I believe. An 8.5x11 exported PDF
> with
> >> my diagram in the middle of it.
> >>
> >> If it's just getting the right code into the babel block, that's helpful
> to
> >> know. Perhaps the easiest way to put it is this: what is the best path
> to
> >> obtain the following:
> >>
> >> - a single pdf output of my TikZ diagram, cropped to fit the diagram
> >> - the font used in the TikZ diagram that I desire (preferably from the
> doc)
> >>
> >> Again, my use-case is one in which I have daily notes or a paper with a
> >> diagram but also would like to preserve the diagram for reuse. With
> babel,
> >> it appears this should be possible -- I can both export normally and
> have
> >> the graphic in the paper or send the TikZ section alone to export and
> use
> >> the graphic in a presentation or elsewhere.
> >>
> >> I wondered about what you said re. putting the settings in the latex
> source
> >> code block, and I was actually fiddling around with that yesterday. My
> font
> >> is simply set like so (present in the examples I posted earlier):
> >>
> >> #+latex_header: \usepackage{lmodern}
> >> #+latex_header: \renewcommand{\rmdefault}{cmss}
> >>
> >> But I tried putting variations of this in the babel block (without the
> >> #+latex_header part, of course) with no success.
> >>
> >> These didn't work for me:
> >>
> >> #+begin_src latex :file flow-chart.pdf :packages '(("" "tikz")) :border
> 1em
> >> \usepackage{lmodern}
> >> \renewcommand{\rmdefault}{cmss}
> >>
> >> or
> >>
> >> #+begin_src latex :file flow-chart.pdf :packages '(("" "tikz"
> "lmodern"))
> >> :border 1em
> >> \renewcommand{\rmdefault}{cmss}
> >>
> >> or
> >>
> >> #+begin_src latex :file flow-chart.pdf :packages '(("" "tikz lmodern"))
> >> :border 1em
> >> \renewcommand{\rmdefault}{cmss}
> >>
> >> I haven't found anything at ob-doc-latex covering how to pass package
> >> arguments or include LaTeX settings directly in the babel block. My
> attempts
> >> at the renewcommand end up with "cmss" ending up in my TIkZ graphic
> >> somewhere...
> >>
> >>
> >> Thanks for persisting with me!
> >> John
> >>
> >>
> >>
> >>
> >>
> >>> --
> >>> Eric S Fraga
> >>> GnuPG: 8F5C 279D 3907 E14A 5C29 570D C891 93D8 FFFC F67D
> >>>
> >>>
> >>
>
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
