Vladimir Lomov <lomov.vl <at> gmail.com> writes: > Hi. > I want to emphasize (using bold monospace font when exporting to HTML) > some parts of text in example block. Consider the following example:
> *** Determining adapter chipset and used driver > #+BEGIN_EXAMPLE > zbox$ lspci -v > ... > 04:00.0 Network controller: *RaLink RT2860* > Subsystem: Device 1a3b:1059 > Flags: bus master, fast devsel, latency 0, IRQ 19 > Memory at febf0000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 3 > Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ > Capabilities: [70] Express Endpoint, MSI 00 > Capabilities: [100] Advanced Error Reporting > Kernel driver in use: *rt2800pci* > Kernel modules: rt2800pci > #+END_EXAMPLE > But in exported html file the '*'s are remain. Is it possible to use > markup in BEGIN_EXAMPLE? Or I have to use another type of block? This would do the trick: *** Determining adapter chipset and used driver #+BEGIN_HTML <pre>zbox$ lspci -v ... 04:00.0 Network controller: <b>RaLink RT2860</b> Subsystem: Device 1a3b:1059 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at febf0000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Kernel driver in use: <b>rt2800pci</b> Kernel modules: rt2800pci</pre> #+END_HTML #+OPTIONS: f:nil Ciao, Renzo