H. Halverson ([EMAIL PROTECTED]) asked:

>If that's the case, tell me how to configure CE to dial-up on OS X. 
>Actually, post the instructions to the list because there are many others 
>who've had this problem. I'd love to get back the ability to have CE 
>dial-in, collect mail and disconnect automatically.

I thin the answer for you is that Emailer need no configuring, except the 
Schedules. I haven't used a dial-up service for years, so have no OS X 
savvy in this area, but basically you configure the remote access 
software, whatever it's called in OS X, and configure *that* to start an 
internet connection when it recieves a request for the net from any 
internet application, in this case Emailer wanting net access, asking 
this to OS 9, that in it's turn request net access from the OS X bridge 
which should activate the remote access OS part in OS X (What's this part 
called again?).
If you also configure it so that it terminates the connection after a 
specific time of inactivity, Emailer can initiate a connection and have 
it dropped (due to inactivity) a few minutes after finishing the mail 
server connnections.
For the latter to work you do have make sure that Emailer isn't checking 
mail with a shorter time frame than what you have configured the Remote 
Access-like OS part to do and also make sure that no other app is making 
net requests (like an open web page).

I'm sure someone on the list who's actually using a dial-up ISP, can fill 
in the details for you. People?

Thank you for reading this far

Micke Bystrom
Project Manager
Web & Idea Developer

___________________________________________________________________________
To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to
<[EMAIL PROTECTED]>  or  <[EMAIL PROTECTED]>

Reply via email to