Hi there,
I'm very interested in this functionality, I want something like the
'iw dev <dev name> station dump' command. This command get an output
like lines bellow (based on peer in wireless network):
---
Station 00:26:5a:XX:XX:XX (on wlan0)
inactive time: 92 ms
rx bytes: 20900902
rx packets: 27711
tx bytes: 1781438
tx packets: 11320
tx retries: 0
tx failed: 0
signal: -37 dBm
signal avg: -32 dBm
tx bitrate: 72.2 MBit/s MCS 7 short GI
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
---
I used the Debug Port, but these information don't exist there (using
'stats nem 1' command).
These information will be in next release? I can contribute with this
implementation, which part do i do? Which part do i take first?
Bye,
> Hello Steven,
> > thanks.> That is exactly what I need.> May I ask you when you scheduled the
> > next release?
>> Regards,> Simone
>
>
>
> On May 29, 2013, at 9:21 PM, Steven Galgano <sgalgano at adjacentlink.com
> <http://pf.itd.nrl.navy.mil/mailman/listinfo/emane-users>> wrote:
>>>* Simone,*>>* *>>* We are working on adding control messages that will
>>>contain radio to*>>* router interface (R2RI) information. This information
>>>will be streamed*>>* out of an NEM (MAC to Transport) at a configurable rate
>>>and will contain*>>* queue metrics and neighbor metrics. Additional
>>>mechanisms will be added*>>* to present the information to application
>>>space.*>>* *>>* Per queue metrics will include:*>>* Queue Id*>>* Max queue
>>>size*>>* Current queue depth*>>* Number of queue discards*>>* Average queue
>>>delay*>>* *>>* Per neighbor metrics will include:*>>* Number of Rx
>>>frames*>>* Number of Tx frames*>>* Number of frames missed*>>* Bandwidth
>>>consumption*>>* SINR average/standard deviation*>>* Noise Floor
>>>average/standard deviation*>>* Rx average data rate*>>* Tx average data
>>>rate*>>* *>>* There will also be some self node metrics. Configuration
>>>information,*>>* such as power level and data rate will be accessible via
>>>the Emulation*>>* Control Port and runtime modifiable.*>>* *>>* This
>>>functionality is scheduled to be in the next release.*>>* *>>* -- *>>*
>>>Steven Galgano*>>* Adjacent Link LLC*>>* www.adjacentlink.com*>>* *>>* *>>*
>>>*>>* On 05/29/2013 02:23 PM, smlabs wrote:*>>>* Hello,*>>>* *>>>* do you
>>>know when this option, (e.g. received power) will be integrated?*>>>* *>>>*
>>>Thanks.*>>>* *>>>* Simone*
*
*
_______________________________________________
emane-users mailing list
[email protected]
http://pf.itd.nrl.navy.mil/mailman/listinfo/emane-users
