Raheeb, looks like you are using the wrong mode setting. You need to set mode to 1 for 802.11a/g for the multicast and unicast rates you set to be valid. With your current configuration, you are failing the mode/rate validation check.
See the EMANE wiki for the various config options: https://github.com/adjacentlink/emane/wiki/IEEE-802.11abg-Model kb Kaushik B. Patel Adjacent Link LLC On 02/05/2015 09:49 AM, Raheeb Muzaffar wrote: > I am using EMANE 0.9.2-release-1 with CORE (nightly_snapshots) and Quagga > MDR. Using CORE, I set EMANE configuration. Attached are the XML files > generated in the tmp folder. If I just change the mode from 2 to 0, 1 or 3 > everything works fine. The OSPF MDR finds the neighbor nodes and so on, but > not when mode 2 (802.11a) is selected. > > Raheeb > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Kaushik B. > Patel > Sent: Thursday, February 05, 2015 1:06 PM > To: [email protected]; [email protected] > Subject: Re: [core-users] 802.11a setup > > Raheeb, what version of EMANE are you using? Also, if you can provide your > EMANE configuration, it may help identify the issue you are having. > > kb > > Kaushik B. Patel > Adjacent Link LLC > > > On 02/05/2015 06:24 AM, Raheeb Muzaffar wrote: >> Hello, >> >> >> >> I have installed CORE, EMANE and Quagga MDR. I want to emulate >> wireless 802.11a network, however, if I select mode 2 for 802.11a no >> routes are discovered ad so there is no traffic flow. Everything works >> fine for mode 0, >> 1 and 3 i.e. for 802.11 b and g. Is there a special configuration for >> 802.11a? How to make 802.11a mode work? >> >> >> >> Thank you for your help. >> >> >> >> -- >> >> Best Regards, >> >> Raheeb Muzaffar >> >> >> >> >> >> --- >> This email is free from viruses and malware because avast! Antivirus > protection is active. >> http://www.avast.com >> >> >> >> _______________________________________________ >> core-users mailing list >> [email protected] >> http://pf.itd.nrl.navy.mil/mailman/listinfo/core-users >> > _______________________________________________ > core-users mailing list > [email protected] > http://pf.itd.nrl.navy.mil/mailman/listinfo/core-users > > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > _______________________________________________ emane-users mailing list [email protected] http://pf.itd.nrl.navy.mil/mailman/listinfo/emane-users
