Bugs item #2011311, was opened at 2008-07-05 11:47 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2011311&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: EMC2 Task Controller Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: John Kasunich (jmkasunich) Assigned to: Chris Radek (cradek) Summary: Synchronized moves (G33, G76) skipped when F=0 Initial Comment: If the feedrate is set to zero (or not set at all), spindle syncronized moves are skipped. start sim-lathe F1; F2; MDI M3S500; G0Z1; G33K0.03Z0; the G33 move does nothing motion doesn't assert hal pin motion.spindle-index-enable EMC thinks that the G33 move completed instantly - if you issue a G1 or G0 next, it is executed Problem happens in TRUNK, not in version 2.2.x For more details see: http://www.linuxcnc.org/irc/irc.freenode.net:6667/emcdevel/2008-03-08.txt (starting at 22:45:49) More discussion: http://www.linuxcnc.org/irc/irc.freenode.net:6667/emcdevel/2008-03-09.txt And some logging info: http://pastebin.ca/934655 ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2011311&group_id=6744 ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
