Feature Requests item #3437610, was opened at 2011-11-13 20:10 Message generated for change (Comment added) made by pmtool You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=356744&aid=3437610&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 1 Private: No Submitted By: Justin Popov (pmtool) Assigned to: Nobody/Anonymous (nobody) Summary: rapid feed override Initial Comment: One of the only features EMC is missing when compared to standard industrial controls is a Rapid Feedrate override. The idea would be to slow just the G0 moves for proofing out programs while leaving regular feedrates unchanged. Typically machines will have a number of options like 100% 50% 25% and then one that is very slow. 5% or so. It would be nice to be able to change these feeds independent of the programmed g1, g2 and g3 feedrates so you would not change the parts finish. Thanks ---------------------------------------------------------------------- >Comment By: Justin Popov (pmtool) Date: 2011-11-16 22:03 Message: The maximum velocity function does look promising.... Is there any way that the maximum velocity could be set up to only change G0 movements? I occasionally run in to a situations where I would actually like the rapid moves to be slower than the feedrate of the G1,G2,G3 moves. Additionally, it seems like modifying the both rapid and cutting feedrates could also cause trouble on a lathe when feedrate is programed in inches per revolution. What would happen if maximum velocity was less than the speed a machine would have to be traveling at to maintain the programmed feedrate/ rpm? Something would have to give. ---------------------------------------------------------------------- Comment By: Chris Radek (cradek) Date: 2011-11-14 11:56 Message: The existing "maximum velocity" feature is very useful for proofing programs. Aside from the on-screen slider and keyboard shortcuts, it can be controlled via wheel through halui, and can be changed to any value down to zero, anytime during or between moves. I find this very powerful and use it extensively for unproven programs on my machine that has very fast rapids. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=356744&aid=3437610&group_id=6744 ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-novd2d _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
