On Tue, Dec 18, 2012 at 12:06 PM, Charles Steinkuehler < [email protected]> wrote:
> -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > The usermode-pci code is ready for testing and review: > > http://git.mah.priv.at/gitweb/emc2-dev.git/shortlog/refs/heads/usermode-pci > the git commit-id I reported yesterday worked. The latest code builds, but fails at runtime (see below). Same system, configure settings, and hardware as reported yesterday. There's a boatload of warnings during the build: http://pastebin.ca/2294663 (gcc 4.6.3) $ linuxcnc LINUXCNC - 2.5.1 Machine configuration directory is '/home/anders/Desktop/emc2-dev/configs/hm2-stepper' Machine configuration file is '3x20-small.ini' Starting LinuxCNC... hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: error no supported cards detected rtapi_app 354: signal 11 - 'Segmentation fault' received /home/anders/Desktop/emc2-dev/bin/rtapi_app(_Z14signal_handleriP7siginfoPv+0x60)[0x804c3ee] [0xb76e940c] /home/anders/Desktop/emc2-dev/bin/rtapi_app(pci_unregister_driver+0x2a)[0x804e7da] /home/anders/Desktop/emc2-dev/rtlib/hm2_pci.so(rtapi_app_main+0xcf)[0xb7082758] /home/anders/Desktop/emc2-dev/bin/rtapi_app[0x804cb73] /home/anders/Desktop/emc2-dev/bin/rtapi_app[0x804ccdb] /home/anders/Desktop/emc2-dev/bin/rtapi_app(main+0x593)[0x804bc63] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3)[0xb73ff4d3] /home/anders/Desktop/emc2-dev/bin/rtapi_app[0x804c1cd] hm2-stepper.hal:41: /home/anders/Desktop/emc2-dev/bin/rtapi_app exited without becoming ready hm2-stepper.hal:41: insmod failed, returned -1 Shutting down and cleaning up LinuxCNC... hostmot2: not loaded <commandline>:0: exit value: 255 <commandline>:0: rmmod failed, returned -1 probe_parport: not loaded <commandline>:0: exit value: 255 <commandline>:0: rmmod failed, returned -1 motmod: not loaded <commandline>:0: exit value: 255 <commandline>:0: rmmod failed, returned -1 trivkins: not loaded <commandline>:0: exit value: 255 <commandline>:0: rmmod failed, returned -1 <commandline>:0: unloadrt failed Cleanup done LinuxCNC terminated with an error. You can find more information in the log: /home/anders/linuxcnc_debug.txt and /home/anders/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal Anders ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
