Gene go for the highest voltage the drivers will take, i also tend to buy the drive that can take 60v+ , i run mine mostly at 48v or 60v , it makes so much of a difference it's worth it
Dave On 6 August 2014 19:27, Marius Liebenberg <[email protected]> wrote: > > On 2014-08-06 19:16, Gene Heskett wrote: > > On Wednesday 06 August 2014 12:39:13 Marius Liebenberg did opine > > And Gene did reply: > >> On 2014-08-06 17:20, Gene Heskett wrote: > >>> On Wednesday 06 August 2014 09:27:47 Marius Liebenberg did opine > >>> > >>> And Gene did reply: > >>>> Where's the link old man? > >>>> > >>>> On 2014-08-06 03:09, Gene Heskett wrote: > >>>>> Describing a new stepper driver kit, 48 volts, 4.5 amps, 256 > >>>>> steps/step, and $25 a motor. Sounds interesting. > >>>>> > >>>>> Cheers, Gene Heskett > >>> Lemme see if I can find it, its in my inbox for the work account. > >>> > >>> <http://links.mkt102.com/servlet/MailView?ms=NDY2MDYwODMS1&r=ODg3MjQx > >>> NTcyMjgS1&j=NTAwMTM1NTM5S0&mt=1&rt=0> > >>> > >>> Should get you to the propaganda pages. > >>> > >>> Cheers, Gene Heskett > >> Thanks got that. The price is good. > > For smaller machines where the xylotex board is being used at or near its > > capacity with the resultant short lifetime I experienced, it could be > just > > what the Doctor prescribed. > > > > Now, if I could just find the makings for a 45 volt, 10 amp supply for my > > mill, I'd be a happy camper in that dept. I have 4, 2M542's in that box, > > but only 28 volts and it stalls if I try to push it beyond 15 ipm rapids. > > > > Cheers, Gene Heskett > I have to agree, anything less than 42v is pretty useless. > > -- > > Regards /Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 743 6064 > QQ 1767394877 > > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
