First, to those of you who's seed found fertile ground and sprouted, Happy Fathers Day.
Now a simulation of the boot screen I am getting after installing the binary-hybrid.iso from a dvd, twice as described. ==================================== loading Grub Welcome to Grub2 error; out of disk entering rescue Grub rescue> ===================================== At which point you can type anything you want, command not found, except for ls, which oddly returns (hd0) (hd0(dos32)) (fd0) (or something similar, I can make a paper copy and bring it in if it would mean anything) is returned. I have now done 2 installs, one with the drive (a 500Gb Maxtor) jumpered for "CS" with the 80 wire cables Master connector plugged into it, nothing on the slave connector, done in graphical mode and, and once with the jumper set for Master, and the Master connector on the 80 wire cable plugged in and an empty save connector. On reboot, including a powerdown reboot, I get the above screen. There is only one error reported at install, something about not being able to do something at $1222xxx, reported instantly after hitting the dvd to load syslinux, but the rest of the install proceeds normally, including letting me manually configure the network after ipv6 and dhcp fail, timing out because there is not a dhcp server running anyplace on my host file based local network on this side of the router. 384megs of sdram, memtest86 says its healthy. So I am bummfuzzled. Is this something anyone else has seen? Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
