And we have a winner! Thanks Kirk, that fixed it. -Tom > On Jun 26, 2015, at 4:42 PM, Kirk Wallace <[email protected]> wrote: > > On 06/26/2015 12:23 PM, Tom Easterday wrote: >> So I ran the lathe sim today and the tool rotates as it should in the >> display. So what in my config is causing that not to work? Here are my >> .ini and tool.tbl: http://pastebin.ca/3037686 >> <http://pastebin.ca/3037686>, and http://pastebin.ca/3037689 >> <http://pastebin.ca/3037689> >> -Tom > > Try putting a D (tip diameter) value larger than 0 in your tool table > and see what happens. > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/ > > ------------------------------------------------------------------------------ > Monitor 25 network devices or servers for free with OpManager! > OpManager is web-based network management software that monitors > network devices and physical & virtual servers, alerts via email & sms > for fault. Monitor 25 devices for free with no restriction. Download now > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers
------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
