On 14/4/17 12:08 pm, Gene Heskett wrote: > On Thursday 23 March 2017 16:47:39 Gene Heskett wrote: > > There has been 3 or 4 lcnc updates since I originally posted this, but I > still have the problem. The keyboards jog xz keys are still scrambled > UNTIL its been homed, after which everything moves the direction it is > supposed to. > > I've changed the order of the XZ to ZX in the ini file but it makes no > difference, even if I reboot after changing it, so I've put that back to > XZ in all 3 of the places in the ini file. And I'm still puzzled. > > Are there any other places I should be checking? > > Thanks all; > >> Greetings guys; >> >> Chucking up that pulley to start making the taper boring, I found TLM >> wouldn't run, throwing errors about a non-existant Y axis >> >> I had not run it since before the joints merge. >> >> 3 hours worth of checking and editing later, I can make it run but the >> axis's are all weird. Pressing a left-right key runs X, and the in-out >> keys run Z. >> >> Watching the leds on the bob, it is actually driving the wrong axis. >> >> But, the DRO is showing the axis thats moving as the correct axis for >> the one thats actually moving. Me confused. Bumfuzzled even. Configs >> attached. Hopefully enough to run it. >> >> What did I miss? >> >> Thanks all; >> >> Cheers, Gene Heskett > > Cheers, Gene Heskett
I have noticed the same and am trying out some fixes at the moment. -- Cheers, Phill ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
