Ah Les just in time for me to test. I recently moved off the grid and
now use a generator to run my machines. The "soft start" will help a
lot. My lathe gearbox spindle component is not all that successful
either. I am about to upgrade all my machines to the latest LCNC as
well.
------ Original Message ------
From: "Les Newell" <[email protected]>
To: "EMC developers" <[email protected]>
Sent: 2017-08-18 16:57:36
Subject: [Emc-developers] Another spindle + gearbox component
Another one from the vault...
This component will control a spindle with adjustable acceleration and
deceleration.
It is designed for use with non-servo spindle drives that have separate
fwd/reverse inputs, such as DC drives and inverters.
If a spindle encoder is available it is can tailor the acceleration and
deceleration to the spindle load.
If not the spindle speed is simulated. The component allows for
gearboxes with up to 16 gears. Each gear has individual control of
speeds, acceleration, driver gain and direction.
I originally wrote this for my lathe as it makes the lights in my
workshop dim if it starts up at full acceleration.
Les
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
