FYI: The docker build containers John Morris put together should work well to build LinuxCNC for ARM, and an armhf cross-build takes less than 15 minutes from scratch (no cache):
https://hub.docker.com/r/dovetailautomata/mk-cross-builder/ ...using VMs is IMHO a lot more convenient than trying to keep a reasonably powered ARM system up and running. :) Example Travis CI integration scripts can be pulled from the various Machinekit repos on github. On 5/15/2019 10:25 AM, Alan Condit wrote: > Gene, > > I would suggest putting an SSD on one of your Rock64 boards USB3 port. It > will build at least 4 to 6 times faster than the USB2 port on the Rpi 3b+. > Just install stretch or what ever your are using on the pi on the Rock64 and > build away. You can build the debs and then you should be able to install the > debs on the pi. > > Alan > >> Date: Tue, 14 May 2019 10:58:03 -0400 >> From: Gene Heskett <[email protected]> >> To: [email protected] >> Subject: [Emc-developers] using buildbot on the pi >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset="utf-8" >> >> Greetings all; >> >> Can the buildbot be rigged to run on a pi with an SSD on the usb bus for >> its working storage? If it can, I might like to see the recipes used to >> make it on your armhf odroid? I have a 60GB SSD on the pi. And I have >> built kernels on it. Slow, as in hours, but acts like it worked, no >> bailouts, so I might as well try to build linuxcnc on it too. >> >> Cheers, Gene Heskett >> -- >> "There are four boxes to be used in defense of liberty: >> soap, ballot, jury, and ammo. Please use in that order." >> -Ed Howdershelt (Author) >> Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > -- Charles Steinkuehler [email protected] _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
