Thanks for finding that, I can fix that ASAP JT
On 4/11/21 11:33 PM, Stuart Stevenson wrote:
Hi, I was reading the LinuxCNC gcode list. I noticed the G52 section example is G53. This may not be the intended G value. I would attempt to change it (if it is possible for me to do so) if I was sure the change needed to be made. http://linuxcnc.org/docs/html/gcode/g-code.html#gcode:g52 I think the value should be G52 in that section. 😇 I also made some changes to my files here. This is a nit picking change but it was fun and didn't take very long. I changed all the G18 references to ZX instead of XZ. This now matches the Fanuc (and almost et al) control usage. I did the same for all the UW axis designations. They are all now WU to follow the same pattern as the ZX designation. thanks Stuart
_______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
