Possibly also record a skeleton of a sheet of material so it could be displayed on a screen preview. Its often the case that a sheet of material is not fully consumed in one session so the sheet needs to be stored and retrieved next time. Knowing what was available to cut would be useful.
Also QTPlasmac has a good example of doing sheet alignment with a laser pointer. (and possibly a camera). Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Fri, 22 Apr 2022 at 09:23, gene heskett <ghesk...@shentel.net> wrote: > On Thursday, 21 April 2022 18:42:36 EDT Bari wrote: > > I am working on new machine vision widgets for QTPYVCP. > > > > Which features would you find useful other than edge detection, corner > > detection and finding hole centers using cameras or microscopes? > > > > -Bari > > It would be helpful if this could interface and work with the "align" > code kit, which records two points on either axis, and diddles the > coordinate map to make the machine square to the workpiece even if the > pallete is not keyed into the table. The addition of a correction map > based on probing the Z, like the better 3d printers have would also be > helpful on gantry machines with unflat extruded alu stick beds. My guess > is thats 100% of those machines. > > Thank you Bari. > > Cheers, Gene Heskett. > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > > > > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
