Ah okay this button you are talking about. It's fixed now in master.
/Hans
Am 25.04.22 um 17:31 schrieb Feral Engineer:
Hello Hans,
Please see attached. It has been this way since installing 2.9 with
gmoccapy 3.1.3.10 with python 3
Please see attached photo
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer
Help support my channel efforts and coffee addiction:
www.patreon.com/theferalengineer
On Mon, Apr 25, 2022, 11:00 AM Hans Unzner <hansunz...@gmail.com> wrote:
Am 18.04.22 um 04:50 schrieb Feral Engineer:
Hey Guys,
I think I've run into a snafu with the latest update of buildbot master
branch with gmoccapy 3.1.3.10. When setting a turning tool, I only have a
tool touchoff X option button, nothing for Z. Anyone else run into this?
even making a simulated stepconf setup yields the same result. Not sure
if
i'm missing something here or not. I don't recall having an issue
setting Z
in the past but I haven't used the machine in a while until the other
day,
now i'm trying to set up something and not having much luck because of
the
missing Z set on the tool offset page.
Phil T.
The Feral Engineer
I can't reproduce that. When I start a lathe sample configuration from
the latest master, I have touchoff buttons for X and Z.
Is this something that "suddenly" disappeared?
/Hans
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers