EDIT:
both 2.8.2 and 2.8.4 iso's burned to sd (when running live)
find and use the Ethernet w/o problems, w/o keystrokes, w/o clicking.
just works!
Is there an Install method from the live desktop?
Would having the Ethernet working when 'Install' was commanded,
would that capture/remember how the device was set up?
thx tomp
On 10/3/22 12:34 PM, Thomas J Powderly wrote:
Ive been trying to install linuxcnc2.8.4 iso burned to sd card in usb
shell
the (gui/tui either) install gets to
configuring network
and hangs
"Oct 3 04:44:46 dhclient6108] XMT: info-request on enp5s0, interval
126520ms."
(theres many pages of this, it cranked all night )
and maybe of interest:
theres special HDT tools on boot menu
Hardware Detection Tools
and I thought i might see a hint in there
choosing PCI devices
i see
"The pci.ids file is missing
PCI device names cant be computed
Please put one in same dir as hdt.
-----------------------------------
unknown:unknown (repeated 24 times)
the ethernet device is listed as pci 3 when i use sudo lshw
"""
*-pci:3
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info:pci@0000:00:1c.5
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode
bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:8000(size=4096)
memory:ff100000-ff1fffff ioport:fa900000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit
Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info:pci@0000:05:00.0
logical name: enp5s0
version: 03
serial: e8:9d:87:dc:39:23
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master
cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd
1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes
driver=r8169 driverversion=5.19.0-2-rt-amd64 duplex=full
firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.7 latency=0 link=yes
multicast=yes port=twisted pair speed=1Gbit/s
resources: irq:17 ioport:8e00(size=256)
memory:fa9ff000-fa9fffff memory:fa9f8000-fa9fbfff
memory:ff1e0000-ff1fffff
"""
btw deb11xfce iso ran fine, no networking problems with ethernet
connection.
it seems a catch 22 ,
as i read something has to be downloaded when installed
and the internet/network is broken.
what to do?
thanks
tomp
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers