Sorry, I just realized that you're talking about 2.7.0 so spindle pins are different in there version.
El dom., 15 de enero de 2023 19:10, Leonardo Marsaglia < ldmarsag...@gmail.com> escribió: > Hi Jon. > > Do you know if he's using *spindle.M.speed−cmd−rps* to feed the PWM gen? > > Because I had problems with a lathe config some time ago because I was > using that pin instead of *spindle.M.speed−out−rps*. > > Stay well! > > El dom., 15 de enero de 2023 15:07, Jon Elson <el...@pico-systems.com> > escribió: > >> Hello, all, >> >> I have a user who can't get spindle speed to work. He says >> he is using 2.7.0 and my USC/UPC boards with the 8-bit >> spindle DAC board. >> >> When he tells it to start the spindle (I presume with M03 >> S1000 or similar) he gets zero out of motion.spindle-speed-out. >> >> Can anybody say what things need to be in order for the S >> word to be sent out from motion.spindle-speed-out? >> >> I think he is using show hal config to see the state of the >> hal pins. >> >> Thanks, >> >> Jon >> >> >> >> >> _______________________________________________ >> Emc-developers mailing list >> Emc-developers@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-developers >> > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers