Several problems? this morning.
1. Used synaptic to fix broken-packages by removing my locally built
linuxcnc-v2.10.0 pacakages.
1a. debians arm64 netinstall, put on an sd card doesn't even try to
boot. Apparently no u-boot or miss-configured for a raspberry pi or a
bananapi-m5.
2. Linuxcnc en docs could then be installed from the buildbot but
linuxcnc-uspace had missing dependencies and would not install from the
buildbot.
3. Made new .debs from this mornings git pull and installed them with
dpkg -l, but dpkg claimed missing dependency's and would not finish the
configuration.
missing dependency's are:
===========================
pi@rpi4:/media/pi/workspace $ sudo ./buster-lcnc-install.sh
Selecting previously unselected package linuxcnc-uspace-dbgsym.
(Reading database ... 422403 files and directories currently installed.)
Preparing to unpack linuxcnc-uspace-dbgsym_2.10.0~pre0_armhf.deb ...
Unpacking linuxcnc-uspace-dbgsym (1:2.10.0~pre0) ...
Selecting previously unselected package linuxcnc-uspace-dev.
Preparing to unpack linuxcnc-uspace-dev_2.10.0~pre0_armhf.deb ...
Unpacking linuxcnc-uspace-dev (1:2.10.0~pre0) ...
Selecting previously unselected package linuxcnc-uspace.
Preparing to unpack linuxcnc-uspace_2.10.0~pre0_armhf.deb ...
Unpacking linuxcnc-uspace (1:2.10.0~pre0) ...
dpkg: dependency problems prevent configuration of linuxcnc-uspace:
linuxcnc-uspace depends on python3-poppler-qt5; however:
Package python3-poppler-qt5 is not installed.
dpkg: error processing package linuxcnc-uspace (--install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linuxcnc-uspace-dbgsym:
linuxcnc-uspace-dbgsym depends on linuxcnc-uspace (= 1:2.10.0~pre0);
however:
Package linuxcnc-uspace is not configured yet.
dpkg: error processing package linuxcnc-uspace-dbgsym (--install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linuxcnc-uspace-dev:
linuxcnc-uspace-dev depends on linuxcnc-uspace (= 1:2.10.0~pre0); however:
Package linuxcnc-uspace is not configured yet.
dpkg: error processing package linuxcnc-uspace-dev (--install):
dependency problems - leaving unconfigured
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for libc-bin (2.28-10+rpt2+rpi1+deb10u1) ...
Processing triggers for gnome-menus (3.31.4-3) ...
Processing triggers for desktop-file-utils (0.23-4) ...
Processing triggers for mime-support (3.62) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for shared-mime-info (1.10-1) ...
Errors were encountered while processing:
linuxcnc-uspace
linuxcnc-uspace-dbgsym
linuxcnc-uspace-dev
=======================
But it loads and apparently runs ok anyway!!!!! So I don't appear to be
disabled.
4. figured it was probably time to update from 32 bit (armhf) buster to
bookworm, but on arrival at raspios site, find its may '23 release is
still bullseye. dl the 64bit desktop anyway. Put it on sd card. I can
edit the card for network stuff etc even before 1st boot, but since its
bullseye, linuxcnc hasn't arrived yet.
5. is it worth my time to do that and switch cards and try to build
linuxcnc on bullseye? The last time I tried that, the python3 was too
new so configure bailed out. I reported that 2 or 3 times here, long ago
when bullseye was new, and was ignored.
So I'm stuck all alone out here in left field and everyone has gone home
for the rest of the month/year/whatever.
Please advise.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
