Finally! Upgraded to sid and installed linuxcnc-uspace from the debian repositories and the good news is the graphics are there! I will try the buildbot2 and linuxcnc.org debs later.
Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Thu, 10 Apr 2025 at 09:45, Rod Webster <r...@vehiclemods.net.au> wrote: > I might make it worse for you. > > I tried my hand here but got Python errors on trixie, installing from the > buildbot2 deb for master (2.10) as below > Unsatisfied dependencies: > linuxcnc-uspace : Depends: python3 (< 3.12) but 3.13.2-2 is to be > installed > Depends: libboost-python1.74.0 (>= 1.74.0+ds1) but it > is not installable > Depends: libboost-python1.74.0-py311 but it is not > installable > Depends: libgpiod2 (>= 1.5.1) but it is not installable > Depends: libpython3.11 (>= 3.11.0) but it is not > installable > Recommends: hostmot2-firmware-all but it is not > installable > > I then tried installing the linuxcnc repos using the linuxcnc-install.sh > script on linuxcnc.org to get 2.94 but am getting pgp key security > errors > Err:5 https://www.linuxcnc.org bookworm InRelease > Sub-process /usr/bin/sqv returned an error code (1), error message is: > Signing key on EEDD0D29F81DCAA0D258661F3CB9FD148F374FEF is not bound: > > Policy rejected asymmetric algorithm because: DSA1024 is not > considered secure since 2014-02-01T00:00:00Z > > linuxcnc-uspace is not in trixie yet but it's in sid. I will keep trying > to get 2.94 but I am out of time now. > > Don't get me started about trixie wanting to upgrade my sources file to > the new format! eg.. > sudo apt update > Notice: Some sources can be modernized. Run 'apt modernize-sources' to > do so. > > Rod Webster > *1300 896 832* > +61 435 765 611 > Vehicle Modifications Network > www.vehiclemods.net.au > > > On Thu, 10 Apr 2025 at 07:22, andy pugh <bodge...@gmail.com> wrote: > >> On Wed, 9 Apr 2025 at 22:09, andy pugh <bodge...@gmail.com> wrote: >> >> > Much to my alarm neither sim/axis/gladevcp/gladevcp_tab nor >> > sim/touchy/gladevcp/gladevcp_touchy even load. >> >> It seems that the fix is simply to open the old .ui files in the new >> version of glade and re-save. >> But it seems odd that this hasn't been noticed previously? >> >> -- >> atp >> "A motorcycle is a bicycle with a pandemonium attachment and is >> designed for the especial use of mechanical geniuses, daredevils and >> lunatics." >> — George Fitch, Atlanta Constitution Newspaper, 1912 >> >> >> _______________________________________________ >> Emc-developers mailing list >> Emc-developers@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-developers >> > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
