RE>>standard requirements 11/13/96
I have previously contacted the Institute of Telecommunications, (Mr. Tomasz Niewodniczanski) & they referred me to Adam Borowski, who is directly involved with ITE standards & development @ the "Laboratory of Type Approvals" in Warsaw. Their standard dates from 1993 & is under development @ this time. Please call Adam @ 48 22 128325 or his secretary @ 128323, fax: 128146 for the latest updates. Also note: If you don't speak french or polish, & try to call the Institute of Telecommunications, (Mr. Tomasz Niewodniczanski), ask to speak to "Sega" who is their translator. Hope this helps. Regan Arndt Safety technologist Nortel -------------------------------------- List-Post: [email protected] Date: 11/12/96 6:44 PM To: Regan Arndt From: [email protected] ----- E X T E R N A L L Y O R I G I N A T E D M E S S A G E ----- Sandy, Recent TREG and [email protected] mail shows the following: Author: [email protected] at P_Internet_mail Date: 7/25/96 7:57 PM Priority: Normal BCC: Tania Grant at P_BSD TO: <[email protected]> at P_Internet_Mail CC: <[email protected]> at P_Internet_Mail CC: <[email protected]> at P_Internet_Mail Subject: re: Poland and Hungary, Regulatory Requirements ------------------------------- Message Contents ------------------------------- Hello Ron, Please let me answer at least some of your questions concerning Safety, EMC and PTT regulatory requirements in Poland and Hungary. 1. POLAND a) Polish Safety Standard: PN-93/T-42107 [IEC 950 (1991) + Amds. with minor deviations]. An outside CB Test Report will be accepted, but samples are required. Contact: Laboratorium Elektrotechniczne PCBC Mr. Wiktor Greviennikow ul. Klobucka 23A 02-699 Warszawa, Poland Phone: +48 22 47 99 16 Fax: +48 22 47 12 22 b) Polish EMC/RFI Standard: PN 89/E-06251. EMC/RFI test reports are only accepted from a PCBC accredited EMC lab. Contact: Laboratorium Badawcze ELTEST ul. Ratuszowa 11, Room No. 136 Warszawa, Poland Phone: +48 22 19 39 66 (Mr. Marek Jewtuch) or Phone: +48 22 18 99 92 (Mr. Edward Rudalski) c) Polish PTT approval: Contact: Institute of Telecommunications Mr. Tomasz Niewodniczanski ul. Kopernika 11 51-622 Wroclaw, Poland Phone: +48 71 72 88 12 Fax: +48 71 72 88 78 ---------------------------------------- Author: "Ray Russell" <[email protected]> at P_Internet_mail Date: 10/9/96 8:08 AM Priority: Normal BCC: Tania Grant at P_BSD TO: [email protected] at P_Internet_Mail TO: Brent Taira <[email protected]> at P_Internet_Mail Subject: Re: Poland Certification ------------------------ Message Contents----------------------------- Dear Brent, As a former Compliance Engineer for a PC manufacturer, we found that Poland would accept EMI and a CB test report from NEMKO. If interested, you might contact: Morten Smith Phone 47 22 96 03 30 FAX 47 22 69 86 36. I hope this helps, Ray Russell I hope this helps you, Sandy. Please note that the ul. abreviation in the addresses does not stand for downsized UL but for 'ulitza', meaning 'street'. Tania Grant, Octel Communications Corporation [email protected] ______________________________ Reply Separator _________________________________ Subject: standard requirements Author: "Sandy Florence-ESF003" <[email protected]> at P_Internet_mail List-Post: [email protected] Date: 11/12/96 10:27 AM Does anyone know the ITE test standard requirements for Poland ? Thanks. Sandy ------------------ RFC822 Header Follows ------------------ Received: by nmisq2.miss.nt.com with SMTP;12 Nov 1996 18:43:31 -0500 Received: from ruebert.ieee.org by ntigate.rich.nt.com with SMTP (PP); Tue, 12 Nov 1996 23:42:49 +0000 Received: (from daemon@localhost) by ruebert.ieee.org (8.7.5/8.7.3) id RAA22882 for emc-pstc-list; Tue, 12 Nov 1996 17:07:47 -0500 (EST) From: [email protected] Mime-Version: 1.0 List-Post: [email protected] Date: Tue, 12 Nov 1996 12:57:56 -0800 Message-Id: <[email protected]> Subject: Re: standard requirements To: [email protected] (Receipt Notification Requested), Sandy Florence-ESF003 <[email protected]> Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Description: cc:Mail note part Sender: [email protected] Precedence: bulk Reply-To: [email protected] X-Resent-To: Multiple Recipients <[email protected]> X-Listname: emc-pstc X-List-Description: Product Safety Tech. Committee, EMC Society X-Info: Help requests to [email protected] X-Info: [Un]Subscribe requests to [email protected] X-Moderator-Address: [email protected]
