Item Subject: Analog phone for ISDN BRI in Australia
Received: from relay.hp.com by hpausa1.aus.hp.com with ESMTP
(1.37.109.16/15.5+ECS 3.4 Openmail) id AA025600275; Tue, 16 Jul 1996
22:31:18 +1000
Received: from ruebert.ieee.org by relay.hp.com with ESMTP
(1.37.109.16/15.5+ECS 3.3) id AA259060271; Tue, 16 Jul 1996 05:31:11
-0700
Received: (from daemon@localhost) by ruebert.ieee.org (8.7.5/8.7.3) id GAA19286
for emc-pstc-list; Tue, 16 Jul 1996 06:07:42 -0400 (EDT)
From: pman...@shiva.com
Message-Id: <199607161001.gaa09...@apollo.gti.net>
List-Post: emc-pstc@listserv.ieee.org
Date: 16 Jul 96 05:59:23
To: t...@sdd.hp.com
Cc: emc-p...@ieee.org
Subject: Analog phone for ISDN BRI in Australia
X-Mailer: Allaire Cold Fusion 1.5
Sender: owner-emc-p...@majordomo.ieee.org
Precedence: bulk
Reply-To: pman...@shiva.com
X-Resent-To: Multiple Recipients <emc-p...@majordomo.ieee.org>
X-Listname: emc-pstc
X-List-Description: Product Safety Tech. Committee, EMC Society
X-Info: Help requests to emc-pstc-requ...@majordomo.ieee.org
X-Info: [Un]Subscribe requests to majord...@majordomo.ieee.org
X-Moderator-Address: emc-pstc-appro...@majordomo.ieee.org
.......................................................................
Item Subject: Analog phone for ISDN BRI in Australia
Greetings Pierre-Marie,
I had such a product approved a couple of years ago with another
company. What is tested depends heavily on the test lab being used
but in most cases its valid. They are concerned with such things as
gain, distortion, tone generation (eg. busy tone and dial tone) and
DTMF recognition. They may also test the PSTN line voltage and ring
wave for voltage and safety.
Austel are concerned with protecting the network, the users and
maintaining a level of performance.
If you have a specific issue you wish to discuss, I suggest you talk
to Dr Vembanor Marney on +61 3 9828 7328. He the senior test report
reviewer for Austel.
I hope this helps
Regards
David
----------------------------------------------------------------------
David Mitchell
Regulatory Specialist
Hewlett-Packard Australian Telecom Operation
347 Burwood Highway, Burwood East, Victoria, Australia 3151.
Internet: david_c_mitch...@aus.hp.com
HPdesk: DAVID C. MITCHELL / HP-Australia, om2
Phone: +61 3 9210 5610, Telnet 2105610, Fax: +61 3 92105570
----------------------------------------------------------------------
______________________________ Reply Separator
_________________________________
Subject: Analog phone for ISDN BRI in Australia
Author: Non-HP-owner-emc-pstc (owner-emc-p...@majordomo.ieee.org) at
HP-Australia,shargw1
List-Post: emc-pstc@listserv.ieee.org
Date: 16/7/96 5:59 AM
On our ISDN BRI product there is an analog input phone to be used on the
ISDN.We have been requested to test this feature based on TS003,related to
PSTN.However there is NO external connection to PSTN rather to ISDN network.
This analog input should be covered by the TS013 (ISDN BRI).
Has somebody experienced the same problem ?
thanks for your answer
Pierre-Marie ANDRE pan...@shiva.com
Shiva International
Pierre-Marie Andre
pman...@shiva.com
Courtesy of RCIC
http://uc.com/compliance_engineering/
