To all, With regard to FCC Part 15 Subpart B and Subpart C.
An intentional radiator it is certfied to Subpart C which essentially calls for Class B emission performance. If the radio is approved as a module and then inserted into another product and that same product is used as a commercial/industrial product the digital portion only had to meet Class A emissions performance for that product. Can the new product be "split " into two parts and say that the radio portion must meet Class B but the digital portion only has to meet Class A. Or is it once a radio is inserted into the product the entire product has to meet class B regardless of where it is used. ? There does not seem to be a definitive statement in CFR (47) Part 15 regarding this situation. If the product can be split, how is it done when some of the digital activity is probably based on radio interface. Thank You in advance for any thoughts on the above. Sandy Mazzola --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).