> Can anyone steer me to an appropriate standard that would specify
> Humidity tests for a heavy industrial product?
>
> Best Regards,
>
> Bill Jacowleff

Bill,
"Appropriate" covers a lot of ground.  Especially since you didn't specify
your market (country, equipment category (e.g. semiconductor machinery)).
You also didn't mention if you are interested in compliance - or if you're
just looking for a little light reading.
If you're looking for international standards try searching:

http://www.iec.ch/

Since you have not specified I'll just stick with the general standards
(there may be a more suitable product family standard).

IEC 60204-1 (1997-10)
Electrical equipment of industrial machines - Part 1: General requirements
Provides a requirement stating that machines must be capable of correct
operation at 40 degress C (humidity <=50%).
This requirement can be altered however by agreement with your customer (see
Appendix B).

You might also consider the following standards:

IEC 60068-2-56 - Ed. 1.0 - Bilingual
Title: Environmental testing - Part 2: Tests. Test Cb: Damp heat, steady
state, primarily for equipment
Publication date: 1988-12
TC: 104 (ENVIRONMENTAL CONDITIONS, CLASSIFICATION AND METHODS OF TEST)
Pages: 15
Price: 36.00 CHF (price code : H).
Abstract: Determines the suitability of electrotechnical products,
principally equipment, for use and storage under conditions of high
humidity.
You would also need the IEC 60068-1 as well.   I imagine a few different
tests plans are described in the standard.

IEC GUIDE 106 (1996-07)  Ed. 2.0  CHF 27.00 17 pages
Guide for specifying environmental conditions for equipment performance
rating
This standard is listed in the bibliography of the IEC 60204

Hope this helps.
Regards,
Matt



---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to ed.pr...@cubic.com,
jim_bac...@monarch.com, ri...@sdd.hp.com, or
roger.volgst...@compaq.com (the list administrators).

Reply via email to