Try EMCO for horns and MITEQ for preamps.

        ----------
        From:  Leslie Bai [SMTP:leslie_...@yahoo.com]
        Sent:  Thursday, August 12, 1999 1:15 PM
        To:  'emc-p...@majordomo.ieee.org'
        Subject:  Horn antennas, pre-amplifier, and return loss measurement


        Hi, Folks,

        Is there anyone can direct me to some sources
        of horn antennas & preamplifiers.

        What I need are sets of horn antenna for spurious
        emissions testing to meet FCC Part 101.

        1 to 18GHz, 
        18 to 26.5GHz, 26.5 to 40GHz, or 18 to 40GHz instead,
        40 to 60GHz, 50 to 75GHz, or 40 to 75GHz instead,
        75 to 110GHz, 110 to 170GHz, or 75 to 170GHz instead.

        Due to the significant space loss over 110GHz, I guess
        I also need a set of preamplifier from 110 to 170GHz.

        I am also studying on return loss measurement  
        methodologies to meet ETSI requirement for
        radios RF port. Since NAMAS calibration of
        network analyzer may cost thousands bucks,
        I am wondering if I could achieve a good result
        (in terms of accuracy and uncertainty) using
        spectrum analyser and waveguide coupler.
        If anyone by any chance has an ready error model
        of the test setup using spectrum analyzer and
        waveguide coupler, I appreciate you could share
        with me to short my research path.

        Thanks in advance.

        Leslie Bai
        Senior Compliance Engineer
        Compliance Quality Manager
        Digital Microwave Corporation
        170 Rose Orchard Way
        San Jose, CA 95134
        Tel: (408)-944-1754

        _________________________________________________________
        Do You Yahoo!?
        Get your free @yahoo.com address at http://mail.yahoo.com


        ---------
        This message is coming from the emc-pstc discussion list.
        To cancel your subscription, send mail to majord...@ieee.org
        with the single line: "unsubscribe emc-pstc" (without the
        quotes).  For help, send mail to ed.pr...@cubic.com,
        jim_bac...@monarch.com, ri...@sdd.hp.com, or
        roger.volgst...@compaq.com (the list administrators).
        

---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to ed.pr...@cubic.com,
jim_bac...@monarch.com, ri...@sdd.hp.com, or
roger.volgst...@compaq.com (the list administrators).

Reply via email to