Cameron, Checkout Doug Smith's webpage for some insight on making RF measurements using various (homemade) probes. http://emcesd.com/
Good Luck, George -----Original Message----- From: Cameron O'phee [mailto:O'p...@ali.com.au] Sent: Wednesday, September 27, 2000 8:59 PM To: 'EMC - PSTC Forum' Cc: Roman Seifert Subject: Probing power plane with analyser. Hello All, I have been asked by one of our design engineers if I can measure the RF signature on the 3v plane on one of our PCB designs. The purpose of this is to compare it to proposed changes for cost reduction, ie removal of bypass caps. I would assume I need some sort of CDN but I have no designs for this application. Does anyone have any ideas on how I can safely probe a 3v DC power rail with an EMC analyser (HP8591E)? Regards, Cameron O'Phee. EMC & Safety Precompliance. Aristocrat Technologies Australia. Telephone : +61 2 9697 4420 Facsimile : +61 2 9663 1412 Mobile : 0418 464 016 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org